Need to download setup software for P915 printer

Lexmark P915 requires 25 Watt HV Adapter (220 - 240V AC, 50/60 Hz) in HV countries OR
25 Watt LV Adapter (100 - 127V AC, 50/60 Hz) in LV countries.
So, you have to buy a power supply as per above specification.

In case the cable marked at '2' above is missing, you can find/ use a similar cable, which can be purchased from a local computer store.
Lexmark P915 Setup Guide

Hope it helps! Good Luck!
CreativeTECH

http://support.lexmark.com/index?page=recommendedDownloads&locale=en&productCode=LEXMARK_P915&segment=DOWNLOAD&userlocale=EN_US#2
Anything you need should be right here

Here's the link to the Lexmark website for the available Lexmark P915 drivers. http://bit.ly/bAoHt5. Click on the Microsoft or Macintosh dropdown found below the page to choose the version of your computer's operating system. If you're using Windows 7, use the Vista drivers. Download and install the software. Follow the instructions on the software. Hope this helps.

Unplug the printer usb cable from your computer. To install, I suggest you use the Lexmark P915 printer software you can download from the Lexmark website. But check if your Vista is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu > right click on Computer > Properties. For 32-bit, click on this link: http://bit.ly/9MpwNB. For 64-bit, click on this link: http://bit.ly/d4tR3d. Download and install. Follow the instructions carefully. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

Hi.

If you do not have the disk you must download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

regards.

Easy answer. Go to google and type in your printer Brand, Model # and then type driver download next to it, this will give you options to download the drivers. If you want the software, go to your manufacturer's website and there should be an option in support & downloads for your software. If not, you can go to download.com and looks for the software there. Cheers.

P915 WinXP EN
btw you may be need to connect the printer only during install when asked.

Hey,

The lexmark drivers and software required for installing the printer is available at www.lexmark.com

Select Drivers & downloads then driver finder.

Type in your model x2350 for example

Select your windows version

Download the setup program.

1.Download software
2.Run the downloaded setup
3.Plugin the printer when asked
4.Done

Thanks,
Ekse

In this case u can download the drivers from the website........ Link: http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:465:0:0
Select ur Operating System and Download the Drivers for ur Computer..... Install the downloaded drivers by double clicking on it...... Thanku

Here you go:

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+P915