Blinking red power button - Panasonic PT-47WX49 47" Rear Projection Television

If power button is on (not blinks) and two red lights are blinking alternatively it means the inkpads are end of life. Ask epson service centre to reset it and replace the ink pad. You can go for wic reset with fees.

If power button is blinking with two red lights, it means your printer cannot initialize. Its a fatal error. Ask epson service engineer to service it.

chec your ic register diode and transistor.
aslo check poer supply waltage and earthing properly.

How many red and green blinks to you see? (What pattern?)

what is the model of your tv?

check sony blinking codes...search at www.scribd.com

i have a sony 57". in the power button, a red blinking light blinks 11 times.
KDP57W5655

A new lamp fixed that problem on mine.....cn

It's in standby mode.

Do a reset and see what happens

While holding down the reset button on the remote
Press the power button on the tv
(The tv will turn itself off the back on)
Now release the reset button

It sounds like the lamp needs replaced.


Please rate this a fixya

I have the sames t.v you have to go in the back flip the power cord switch...then reboot the t.v.

Having similar issue with my PT-44LCX65. Lamp blew and replaced it (last month), never figured out how to reset timer. Now red indicator light blinks once every 5 seconds and after about 4 minutes TV goes black.... Any ideas?