Question about Zebra 105SL Thermal Label Printer
Posted by Anonymous on
SOURCE: Zebra 140xi II error
If you open the case there is a sensor that detects whether the head is opened or not that is connected to the open and close lever. Sometimes the tab that blocks the sensor when it is closed get out of alignment or comes loose or the sensor is jarred loose. Make sure the tab breaks the beam.
Posted on May 12, 2008
SOURCE: printing error condition
First clean the sensor tag and sensor head open and tape. Then perform a calibration label pressing the PAUSE and FEED buttons and turn on the printer, release the keys until it starts to move the label. Wait until you are finished and ready to print.
Posted on Mar 16, 2009
Alert Head Open will show everytime u open the Head , when u close back the head it will show Alert CLeared Head Open, then it's normal.
Ribbon Out Show means the printer doesn't detect a ribbon, make sure there's nothing wrong with ribbon installation. if everything fine, then the problem is you Ribbon Sensor. u can try to adjust the sensor with a screwdriver ( - ), make a little bit higher
Posted on Aug 20, 2009
you need to connect with some network to the ip adress coming on the setings, if you dont connect with network, that function not apper.
If connect, you be aple to change to IP estactic and the Gateway and the subnet mask.
Dont forget to save.
Posted on Nov 13, 2010
Tips for a great answer:
Jul 24, 2014 | Zebra ZM400 Thermal Label Printer -...
Sep 17, 2013 | Zebra ZM400 Thermal Label Printer -...
Feb 03, 2012 | Zebra ZM400 Thermal Label Printer -...
Mar 03, 2011 | Zebra ZM400 Thermal Label Printer -...
Oct 15, 2010 | Zebra 105SL Thermal Label Printer
Apr 09, 2010 | Zebra 300DPI CUTTER [zm400-3001-1000t]...
Dec 17, 2009 | Zebra 300DPI CUTTER [zm400-3001-1000t]...
Mar 16, 2009 | Zebra 220XiIII Label Printer
Oct 14, 2008 | Zebra 203DPI Printer
1,322 people viewed this question
Usually answered in minutes!