N300 Daul-Band Wi-FI Range Extender

By following these simple steps you canupdate update the firmware on your netgear Wi-Fi extende.

• First of all, connect your extender to your router Connect to your extender's Wi-Fi network.
• Visit at NETGEAR Suppor website
• Enter your extender's Model Number or Product Name.
• Click Downloads.
  

• Select a firmware version and click Download.
• Unzip the file if needed.
• Enter mywifiext.ne. in your web browse.
• Enter the extender admin user name and password.
• Click Firmware Update.
• Click the Browse button, then locate and select the firmware file that ends in .img or .chk.
• Click the Upload button. The firmware update starts and the extender restarts. The firmware update process takes about two minutes.

The N300 EX2700 is a WiFi Range Extender and needs to be connected to a Wireless Access Point already running somewhere in your house. Can you connect to the WAP ok? If you can, is the range extender connected to it? If it is try using the WAP button on the extender to try to connect to it.

try this link out.

https://www.google.co.uk/webhp?sourceid=chrome-instant&rlz=1C1CHBD_en-GBGB719GB719&ion=1&espv=2&ie=UTF-8#q=Can+you+use+a+laptop+to+install+Belkin+N300+range+extender

because it is an extender,you need to connect to the modem with an lan and then you can use the wifi

https://kb.netgear.com/25716/How-do-I-install-the-WN3000RPv3-as-an-Extender?cid=wmt_netgear_organic

Get the user manual here for this wi-fi extender, it is not a router. N300 WiFi Range Extender

QUICK TIP: When finding a location for your range extender, it is best to place it within the same room as the computer.
You can also use https://192.168.206.1 to access the range extender's web-based setup page.
Step 1:
Place the range extender in an area where the Wi-Fi signal of your router is strong, but near where you want to establish your extended network.
Step 2:
Plug in the power supply of the range extender and make sure that it is powered ON. Shortly, its light will begin to flash blue and orange.
Step 3:
Place your computer near the range extender. Also, make sure your computer is not wired to any other network devices.
Step 4:
Connect your computer to the range extender by opening the list of Wi-Fi networks and selecting Belkin.setup. Confirm that the list shows it's connected.
Step 5:
Open a web browser, enter https://belkin.range into the Address bar, and follow the on-screen instructions. Don't forget to type "http".
Once the setup for your range extender is complete, you may connect the computer to its Wi-Fi.