Question about Frigidaire FEF336BC Electric Kitchen Range

Open Question

Sunbeam electric blanket blinking - Frigidaire FEF336BC Electric Kitchen Range

Posted by Anonymous on

Ad

2 Related Answers

wikedwhich

  • 1 Answer

SOURCE: Sunbeam Electric Blanket blinking

I had checked the "connection" at the blanket before but after reading this I unplugged it from the wall and re-checked the plug in at the blanket. It's not flashing anymore and it seems to be working.

From Sunbeam's site:

Q: What does "FF" mean on display of my control?
A: If you have a digital control, it is designed to flash "FF" on the display to notify you that a problem may have been discovered. Gradient controls and warming throw controls use a blinking indicator light for this purpose.

Follow the instructions on the flag tag to reset the control or follow the steps below.

  • Unplug the system from wall outlet.
  • Check that the control is well connected to the module.
  • Plug the power cord into the wall outlet.
  • Set the control to "on".
If the system still does not operate, disconnect the power cord and Contact Us.

Posted on Dec 02, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Binking light on one control of electric blanket (Sunbeam)

I'm not sure how I was registered as having a problem with an electric range; my problem was with my Sunbeam electric mattress pad.

I used one of the suggestions I read here. I unplugged the connection to the mattress pad and blew into the receptacle to clear any dust or lint from it. I reconnected everything, plugged it in, and the problem has been eliminated.

Thanks for the suggestion.

Posted on Oct 06, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I plugged in the cord to the blanket, it displays a continuous blinking of the letter F


Sunbeams - blinking "F" means that the connection to the blanket was loose. Make sure you give it a good push to get the piece fully engaged.

Nov 18, 2014 | Sunbeam Twin Electric Auto Heated Blanket-...

1 Answer

Se My blanket is blinking F2 and I can't set the controls


To reset the control:
1) Unplug the blanket from the wall outlet.
2) Check that the control is well connected to the module. (Disconnect and re-connect it).
3) Plug the power cord into the wall outlet.
4) Set the control to "on".
Try 1-4 three times. If the blanket still does not operate, disconnect the power cord and contact Sunbeam Customer Care at 1-(800) 892-7684.

Oct 07, 2014 | Sunbeam Electric Blanket - queen

1 Answer

Cant find the flag tag to reset my electric blanket control


To reset the control:
1) Unplug the blanket from the wall outlet.
2) Check that the control is well connected to the module. (Disconnect and re-connect it).
3) Plug the power cord into the wall outlet.
4) Set the control to "on".
Try 1-4 three times. If the blanket still does not operate, disconnect the power cord and contact Sunbeam Customer Care at 1-(800) 892-7684.

Oct 05, 2014 | Sunbeam Electric Blanket - queen

1 Answer

One control works and not the other control


I have a Sunbeam electric blanket. One control is blinking F2. How do turn that off?

Mar 05, 2014 | Sunbeam California King Arlington Heated...

1 Answer

Sunbeam Electric Blanket Model 972 A5 Type 692 (or 592) with temperature control 1 to 9 with 75 mins and 12 hrs and off control positions. The light blinks red and the blanket won't heat up. Please...


Did you get helped last year? If so please ignore. Otherwise....

Hi. You can locate a Sunbeam Service Centre via http://www.sunbeam.com.au/Pages/Support/Repairers.aspx

You're looking at $69,95 recommended retail.

BTW have you checked that it's not the blanket? Swap the controls over, if the problem follows the control it's the control. If the problem stays on the same side of the blanket, it's the blanket.

Also note Sunbeam has a 3 year warranty on electric blankets. If Date Of Purchase is less than 3 years ago call 1800025059 option 1 to speak to their Customer Service,

Apr 08, 2009 | Sunbeam 4237 / 4238 Iron with Auto...

3 Answers

Electric Blanket Control Blinks


mydual control sunbeam electric blanket blinks on one control

Dec 23, 2008 | Sunbeam 4237 / 4238 Iron with Auto...

14 Answers

My Sunbeam electric blanket controls blink when I plug the control cable into the blanket. I cannot turn the controls on or off.


Same problem, but now it is ok.  I emailed Sunbeam and was told that if my blanket was not plugged directly into a wall outlet it was not getting enough power and I needed to plug it into a wall outlet taking these steps:
1) Unplug from the surge protector/extension cord 2) Unplug from the blanket 3) Plug back into the blanket 4) Plug into a wall outlet

Jul 21, 2008 | Heating & Cooling

Not finding what you are looking for?
Frigidaire FEF336BC Electric Kitchen Range Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3522 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a Frigidaire Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...