There is a website that will sell it to you for 6.00 for one. I just googled Fantom Twister and just look for parts. They have the filters and belts. That is about all we can get for our fantom. Just wish someone would repair these vacums.

Aug 07, 2010 | Fantom Vacums FM741 Twister Bagless...

1 Answer

It smells as if something is burning and I have cleaned everything out of it

You need to replace the belt. You can get Fantom replacement belts here:

Fantom replacement belts

Jan 29, 2010 | Fantom Vacums FM625H Vacuum

1 Answer

Where can I find a belt for my Fantom Fury vacuum and how do I replace it?

You can get replacement belts and view the manual here:

Fantom Fury Replacement Belts and Manual

Nov 28, 2009 | Vacuums

1 Answer

I need a belt size for the Fantom F 12052 00 model number gf9. Its not found on the web site.

Here is the belt you need and the manual with instructions:

http://vacbelts.com/fantom-fury-belt.htm

Nov 27, 2009 | Vacuums

1 Answer

How do I change the fantom fury belt?

Fantom Vacuum site. Find the Model #-usually
on the back of this model,type it in and you can
read and look at diagram .Good Luck.
Belt ordered at Totalvac.com.

Dec 29, 2008 | Fantom Vacums XT450K Upright Vacuum

1 Answer

Change my belt on a fantom vacuum model number is f1420gf

http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=766591
Generic problem for all Vacuums
Change my belt on a
Posted by sylvester021 on Jul 10, 2008
Change my belt on a Fantom vacuum model number is f1420gf

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. The belt change on the Fantom is to remove the bottom plate by undoing the screws, clips or levers, then cut off the old belt, remove the brushroll on the pulley side and place the new belt on the pulley side and replace the brushroll. Then use a belt puller or screwdriver with a hook on the end and then stretch the belt onto the motor pulley and then track the belt in a straight line. The replace the bottom plate and you should be fine. The recommended belt change on a vacuum with a flat belt is every 4 to 6 months for the best cleaning and always use the genuine belts for the Fantom. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
These are the other brands that use the same tech support line
Shark / Euro-Pro / Infinity / Bravetti / and Fantom
http://www.fantom.com/ Customer Tech Support 1-800-798-7398
Hours are Monday thru Saturday from 9:00 AM to 6:00 PM (EST)
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 10, 2008 | Vacuums

1 Answer