How do I change the channel on my Westinhouse LTV32w1?

T con board or the LCD panel is faulty.
If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Go to Ebay and type in the model number in the search and scroll down to reveal the availibility and price. Shopjimmy.com may have one too. Be sure to match up the number from your board.

It is caused by a failing transistor that after it reaches critical heat it caused the fail safe circuit to be invoked. TV shuts down, component cools off and starts it ascending to critical all over again. The longer you leave this problem the more costly to repair as it will eventuall spread to the other components overheating and possible fire.

Take it in for repairs now before it gets worse.

Please rate my help++++Thanks for using FIXYA

You will pay more for the replacement panel then you will for repalcing the TV. The part number is LTV32W1-LCDP and is no longer avilable.

Partstore.com has it for $19.95. It's under remotes, then TV remotes, then Westinghouse digital, then under LTV-32W1.

Westinghouse LTV-32w1

replace capacitor c162 on power supply

power supply was a delta electric dps210ep-2c rev01

reheat any solder joints that don't look 100% as well .
such as c310 .

this is a known working fix . try before you buy a supply .

try setting up the tv using the default setting
make sure that the tv searches and installs al of the channels

Lou Margo
Allied electronics

Hello,

The Power Supply for LTV-32W1 is listed below.

Westinghouse LTV-32W1 Replacement Power Supply Board

Probably on the main board, most people use an external source for sound, tv does have a problem