BUSH AE56SW. Need to know what picture to turn the dial to to use the oven ?

Picture of oven dial for smeg 60 cm wide electric oven is:



Picture of oven dial for smeg 90 cm wide electric oven is:

What is the brand and model number of your oven?

e studio 450 error code F110

Here is a link to the manual in pdf format http://argos.scene7.com/is/content/Argos/4894827_R_D001pdf http://argos.scene7.com/is/content/Argos/4894827_R_D001pdf

Typically an oven beeps when the interior temperature macthes the temperature where you set the dial. This is an audible signal to that fact and particularly helpful when you need to pre-heat the oven. For example it you want to cook something at 350 degrees, you set the dial at 350. When your oven reaches that temperature it beeps to let you know. Some cooking directions tell you to preheat your oven. In that case, when you set the dial to 350 and wait for the beep...you know you are safe to start your cooking process because the oven is now pre-heated to the temperature you set. If your recipe requires a pre-heated oven, and you don't wait for the beep, your taking a guess at what temperature you're cooking your food. Additionally, if you want to know what the internal temperature of oven is and your oven is heated...you simply turn you dial setting and listen for the beep. Again, if you set your oven at 350 and you want to know how hot your oven is... slowly turn the dial setting. If the oven beeps at 275 then that's how hot your oven has gotten. To let it finish heating to 350 just reset the dial and wait for the beep.

I dont know if this helps but if you turn the dial to the different settings and leave if for 5 to 10 minutes between testing you should be able to figure out what does what. Conventional generally means no fan forced. Fan forced generally means fan with one to two elements. Super fan forced generally is fan with two to three elements. You should be able to see or feel most elements. Sometimes the one or two elements in the bottom are actually located beneath the oven floor.

Here is the manual for the Tecnika Oven
http://docs.google.com/fileview?id=0B8VBVp0MQQl6ZWU0ZWNlM2UtMDIzNi00NzM5LWE2ZWYtZDFhOTQ1YzY4MjE1&hl=en

I have this exact same oven and this "feature" annoys me no end. To turn it off ... turn the clock dial to PAST the time that the timer dial shows. EG: If your timer dial is showing 6, turn the clock dial so that it rolls past 6 o'clock. This will pop out the timer dial and thus turn off the timer, allowing you to use the oven normally.

To stop accidentally pushing/turning that timer dial, I removed the knobs. Good luck.

copy and paste this address into your browser's address window and download the pdf you will find there
http://www.centralproperties.co.uk/wp-content/uploads/2014/04/Built-In-Oven-Instructions-Belling-OUX69-MF.pdf