Waterco Baker Hydro 80K Btu Titanium Manual Pool Heat Pump Logo

Related Topics:

A
Anonymous Posted on Jun 02, 2014

Error code oT waterco titanium heater - Waterco Baker Hydro 80K Btu Titanium Manual Pool Heat Pump

2 Related Answers

David Wright

  • 3 Answers
  • Posted on Mar 10, 2013

SOURCE: i have a waterco titanium pool heater water is pouring out of drain holes in the bottom of unit.I have to keep filling up the pool every other day.what do u think is causing the water to puor out like

in which area do you live, as if the air temp is colder than the pool water it is evapoartion most likely, Test the water coming out of the heater against the water in the pool, if your pool is salt water and the water coming from the heater has no salt then your pool is not leaking, as the heat pump is like an air conditioner it will produce condensate Water from the air. in steamy weather there will be alot of water. David PoolWerx Brisbane

Ad
mike0862

Mikey

  • 6903 Answers
  • Posted on May 08, 2020

SOURCE: Error code on my waterco titanium pool water heater says nFL.

NFL code: No water flow, not sufficient water flow through the pool heat pump or the water pressure switch needs to be adjusted or is defective.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

My Waterco Titanium Instamatik 90 display shows 34 degrees and won't start I don't know why ? The fan doesn't spin?

Post edited for clarity. Post moved from Cars to Pool and Spa.

Contact the maker direct.

Pool and Spa Spare Parts - Waterco

https://www.waterco.ca > ... > Spare Parts > Pool & Spa
Downloads. Catalogs · Brochures · Manuals · Spare Parts · Pool & Spa · Water Treatment · Aquaculture. Pool & Spa - Spare Parts. Blowers.
Jun 21, 2021 • Pool & Spa
0helpful
1answer

Waterco pool heat pump displays error code "ot"

Pull thermistor out and clean it with rubbing alcohol and reseat it. Reseat all wire, harnesses, plugs, relays, etc. that are attached to it.
0helpful
1answer

Error code on my waterco titanium pool water heater says nFL.

NFL code: No water flow, not sufficient water flow through the pool heat pump or the water pressure switch needs to be adjusted or is defective.
0helpful
2answers

Waterco Aqua Heat Titane 101, The Fan Come On But Compressor Does Not KickIn?

make sure your filter is clean, heat pumps are fussy about too much back pressure. you might try it with the filter cartdrige renoved
0helpful
1answer

Fan Runs But Compressor Does Not kick In Waterco Aqua Heat Titane 101

I had the same problem last week. I called a technician who found out that the capacitor was defective. Cost 50$ + the service call.

If the capacitor is working, it might be the compressor...

0helpful
1answer

I have a waterco titanium pool heater water is pouring out of drain holes in the bottom of unit.I have to keep filling up the pool every other day.what do u think is causing the water to puor out like...

in which area do you live, as if the air temp is colder than the pool water it is evapoartion most likely, Test the water coming out of the heater against the water in the pool, if your pool is salt water and the water coming from the heater has no salt then your pool is not leaking, as the heat pump is like an air conditioner it will produce condensate Water from the air. in steamy weather there will be alot of water. David PoolWerx Brisbane
0helpful
1answer

WATERCO HEAT PUMP TITANIUM INSTAMATIK 101 FAN DOES NOT TURN ON

Check the fan relay , check the fan blade isn't free to turn
Not finding what you are looking for?

1,004 views

Ask a Question

Usually answered in minutes!

Top Waterco Pool & Spa Experts

Brad Brown

Level 3 Expert

19187 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

 Mikey
Mikey

Level 3 Expert

6903 Answers

Are you a Waterco Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...