Question about Konica Minolta Bizhub Press C6000 Copier

1 Answer

Please set replenish toner unit correcty - Konica Minolta Bizhub Press C6000 Copier

Posted by Anonymous on

Ad

1 Answer

Philip Hughes

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

Replenish toner unit is the unit that is secured with two screws and comes to the right and these are unscrewed. The presence of this unit is signaled by a sensor positioned under the top cover. Check that sensor for proper functionality in Service Mode.

Posted on Jun 02, 2014

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp copier Mx 5000N is doing continuous toner replenishment I changed toner cartridge drum developer still replenishment what do I do


Hi,
If the machine is still trying to add toner after the toner cartridge has been replaced & the developer is new then I would look at the toner supply motor for that particular colour. Also check for a blockage within the small tube between the toner cartridge & the developer unit. You could try swapping the toner supply motor with one of the other colour motors as they are all identical. If the fault switches to another colour then the motor is at fault.
You can also check the operation of the toner motor in simulation 10.
Hope this helps.
Dave.

Jan 09, 2017 | Sharp Office Equipment & Supplies

1 Answer

Sharp AR5516 Printer Error F2 40 Pls Provide Solution


Detail:

ATC sensor value abnormality

Cause:

Connector connection trouble
Toner cartridge installation trouble
Sensor breakdown

Check and remedy:

Connect the connector again.
Install the developing unit again.
Replace the developing unit with a normal one.


Thats what the Manual says, your toner is not replenishing , could be your toner motor , or your toner is empty , or your developer sensor

Feb 24, 2015 | Sharp Office Equipment & Supplies

1 Answer

Please set replenish toner unit correctly


install OEM toner not third party

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Dec 17, 2013 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

Konica - please set replenish toner unit correctly


reinstall the toner bottle correctly

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Dec 15, 2013 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

Please set replenish toner unit correctly


the whole section that houses the toner is not closed properly

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Nov 12, 2013 | Konica Minolta Bizhub Press C6000 Copier

1 Answer

After powering on, it will show F2 on the Sharp SF 2540 Copier, So please, I need a programme code to clear it or any other solutions to solve it problem


You need to take it to a Sharp technician to check machine , usually a toner issue that toner is unable to replenish in developer unit and so blows the chip on toner cartridge ,

replacing toner cartridge rarely helps
seeing as it is a deeper issue

Sep 12, 2013 | Sharp SF 2540 Copier

1 Answer

Como soluciono el error 7000 que me sale en la kyocera


Code 7000
Contents: Toner motor lock error A motor over-current signal is detected
continuously for 5 seconds since the toner motor is activated.

Causes: Lump of toner inside toner container.
Check procedures/corrective measures: Replace the toner container.

Causes: Defective toner replenishment drive system.
Check procedures/corrective measures: Replace the developer unit

Causes: Defective toner motor.
Check procedures/corrective measures: Replace the developer unit

Causes: Defective engine PWB.
Check procedures/corrective measures: Replace the engine PWB

Jan 21, 2011 | Kyocera FS-2000D Laser Printer

1 Answer

"TONER REPLENISHMENT IN PROGRESS


please remove the waste toner stored in the waste toner content box

Jan 11, 2011 | Sharp AR-275 Copier

1 Answer

C-0F32 FOR KONICA MINOLTA BIZHUB C350


Abnormally low toner density
detected Magenta ATDC Sensor

T/C 0.21 % or less is detected ten consecutive times
in the Developing Unit as validated through the toner
replenishing amount determination control.

Check Developer unit, check toner supply ratio in the service mode, under Image Process control and make sure that Toner motor is sping and adding toner into Dev. unit.
Also check and see if you have enough Developer. clean ATDC sensor and run Image Quality adjustment

Apr 13, 2010 | Konica Minolta Office Equipment & Supplies

3 Answers

C2557 error message


If is a BW 350 go to service mode ( stop 0 0 stop 01) counter apecial part counter reset drum and dev switc off the very quiqly service mode function run f8. Did you replaced drum and developer?

Aug 11, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta Bizhub Press C6000 Copier Logo

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6960 Answers

carpediemweb

Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...