Question about Epson Stylus CX6400 All-In-One InkJet Printer

Open Question

Printer is printing but no print on paper

I am trying to print and paper is sliding through but no print on paper why is that, ink is full

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
JayBlair

Jay Blair

  • 328 Answers

SOURCE: printer

Heads are clogged. Has it been sitting for an extended length of time? Ink will dry up in the heads and tubes. Alot of work to take apart and clean and may still not work. Try to get a service manual at justmanuals.com

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Posted on Aug 09, 2007

Ad

Anonymous

  • 556 Answers

SOURCE: Not printing well in black ink.

The manuals,online guide and trouble shooting sections could help you resolve your problem. Contact support has a chat facility on some pages that may help.

Click this Link

Under Select a Product Range
Choose Multifunction Printers4.gif on the webpage1.gif
Under Select a Product
Choose Stylus CX5400 on the webpage
Under Select an OS
Choose the operating system1.gif on the machine where you will install the printer on the webpage
Click Confirm Selection

The manuals and documentation link will allow you to download manuals that were on your CD ROM

you may want to bookmark the online guide, if present, to help with future problems -- that probably was not on the CD

Click the back button on the browser

click the Drivers and Software Link

This allows you to download software files that were probably on your installation CD

Click the back button on the browser again

Trouble Shooting and Contact Support could be an interesting link in the future too when and if you have problems.

I hope this helps

Posted on Dec 16, 2007

Anonymous

  • 399 Answers

SOURCE: Epson RX-500 ink's full but won't print

u just have to replace the refilled cartridges.and insert new orignal cartridges.this is a very common problem in epson printers that refilled cartridges work sometimes and sometimes dont.so insert new orignal cartridges to have good printouts.

Posted on Dec 06, 2008

gwbm

Gerry Millward

  • 353 Answers

SOURCE: Epson Stylus C66 inkjet Printer does not print !

Have you tried a cleaning cycle? If not, try one. Now run a nozzle check using the status monitor (right click the little printer icon in the bottom right corner of the screen and select nozzle check). Is there any sign of ink on the paper. Try up to three cleaning cycles. If ink is now flowing, but not yet perfectly, don't carry out any more cleaning cycles. Just leave the printer for 24 hours (to allow any air in the print head to disperse). Then repeat the cleaning cycle/wait process. It may take a while to restore a perfect nozzle check print. If these actions produce no positive results, report back.

Posted on Feb 01, 2009

aicaxz

Anjazmoro Wicaksono

  • 511 Answers

SOURCE: Acts like it's printing, ink is good, but nothing prints out on paper.

Nothing at all? Poor you are. The pump may damage or lost electricity.

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error E and 5


Number following "E"

Cause

How to correct

2

No paper. /
Paper does not feed.

If paper is not installed, load it and then press the <Black> or <Color> button. When paper is installed, check each of the following items and try printing again.

1. Confirm only recommended paper is installed.
2. Confirm paper is installed properly.
3. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.
4. Clean the paper feed roller to resolve the error.

3

Paper jam

Remove the jammed paper.
If paper jams frequently occur, check the following:

1. Confirm there is no foreign material inside the machine.
2. Confirm only recommended paper is installed.
3. Confirm paper is installed properly.
4. Confirm the maximum number of sheets in the auto sheet feeder is within the paper limit mark.

4

Empty ink tank

An ink cartridge is empty.
To cancel printing, press the <Stop/Reset> button.
To continue printing, press <Black> or <Color> button.
After printing completes, replace the empty ink cartridge.
Printing with an empty ink cartridge may cause the machine to malfunction.

5

The ink cartridge(s) is not installed. / The ink cartridge(s) cannot be recognized.

The ink cartridge may not be installed properly, or an unsupported ink cartridge may be installed.
Install a recommended ink cartridge.

Make sure to install both ink cartridges even when you set the machine to use only one ink cartridge in printing.
If one of the ink cartridges is missing, this error can occur.

7

The ink cartridge is not installed in the appropriate position.

The ink cartridge is not installed in the proper position.
Install each ink cartridge in the proper position.

8

The waste ink absorber is almost full.

The waste ink absorber is getting full.
Press the <Black> or <Color> button to clear the error and continue printing.
Printing can continue until the waste ink absorber becomes full. If the waste ink absorber becomes full, the machine will require service.

The waste ink absorber is a part inside the machine, which absorbs ink used in the cleaning operations.

9

A specified period of time has elapsed without receiving a response from the digital camera. / A print mode compliant with PictBridge is not selected. / A specified period of time has elapsed without receiving a response from the digital camera.

The machine cannot communicate with the connected camera.
Disconnect the cable between the machine and the camera to clear the error.
Check the following items, then try printing again.

1. Confirm that the camera you are using supports PictBridge or Canon Bubble Jet Direct.
If the camera does not support either one, the machine cannot print directly from the camera.
2. Set the camera in PictBridge print mode before it is connected to the machine. This is required before printing for some cameras that support PictBridge.
Please refer to the camera instructions for more information about procedures required before and after connection to the machine.
3. There may have been no response from the camera for the prescribed time.
Re-connect the cable between the camera and the machine.

1 , 4
1 , 5

The ink cartridge cannot be recognized.

An unsupported ink cartridge may be installed.
Install only recommended ink cartridges.

1, 6

The ink level cannot be correctly detected.

A used ink cartridge may be installed, or the ink cartridge is empty.
Replace the ink cartridge.

Press the <Black> or <Color> button, to clear the error and continue printing without replacing the ink cartridge. However, the remaining ink amount cannot be detected properly, so the function to detect the remaining ink amount does not operate.

1 , 9

Scanning failed.

Scanning a document failed.
Check if the document is placed in the correct orientation / position and try the operation again.

2 , x
3 , x
4 , x

(Where x represents a number)

-

Turn the machine off, and remove the power cord from the electrical outlet.
Wait approximately ten minutes then plug in the power cord and turn the machine on.
If the problem is not resolved, the machine may require service.

Feb 18, 2012 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

It will not print. It passes the paper through without printing anything on it. The ink cartridges are new. It prints a test page. but it will not copy. The computer says its ready to print. The...


A test page prints with the proper ink/text showing up?Have you tried restarting the computer? Have you powered off the printer and turned it back on? You could try reinstalling the printer software and see if that helps.

Mar 21, 2011 | Dell 948 All-In-One InkJet Printer

1 Answer

I replaced the clear ink tank on mx7600 and the message "the clear ink is empty" will not go away nor will it print in black. The brand new Canon brand clear ink can be seen on the ink tank itself and in...


Yeah, me too. I fiddled with cycling the power, removing and reinserting the tank, doing maintenance tasks like cleaning the jets, yadda, yadda, no dice. New full Canon tank displays empty. Boo.

I figured "What the heck, I'll try printing anyway" and sent a test page on plain paper. It warned me the tank was empty, then did a bunch of those cartridge moves it likes to do (you hear the carriage moving around cleaning or something). After like 90? seconds of cleaning noises, it figured out that the tank was full, the status went to full, and it printed the page fine.

So my advice is, try printing a page anyway.

Oct 20, 2010 | Canon PIXMA MX7600 Multifunction inkjet

1 Answer

When i replace with new original 818 color and black/white ink cartaiges the ink status show as b/w full and color iswith"x" mark(no ink) and printer can"t take paper i also re load the driver software


If there is an "X" on the color cartridge indicator then there is a problem with it. If you have removed the plastic tape that covers the part that connects to the computer and you still have this problem then the cartridge is defective and needs to be returned to the store and exchanged for another that is good. Exchange the cartridge and install the replacement. This should solve the problem with the printer not recognizing a full color ink cartridge.

You mentioned that the printer cannot take paper. Please clarify what happens when you load the paper tray and try to print? Are you loading paper one page at a time using the external feeder or are you loading the paper tray full with paper before trying to print? If your loading page by page or filling the tray with only a few sheets of paper then try loading a bigger amount of approx 1/2" of paper. It is easier for the printer to grab paper when the try has a good amount in it. If it still will not load the paper when the tray is full and inserted correctly, please advise what happens when you try and print - exactly? Does the printer respond to the print command sent from the computer? Does it make attempts to load the paper and then fail and stop? Does it pick up paper and then show a paper jam? Does the printer do anything when trying to print from your computer? Answer these questions and I will help you solve this problem right now.

Sep 27, 2010 | HP Deskjet 3420 InkJet Printer

1 Answer

Will not print. e 2 flashes on screen


ERROR CODE CANNON MP150/MP160

E2 - No paper (ASF)
E3 - Paper jam
E4 - No ink
E5 - The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly
E8 - Waste ink absorber full, or platen waste ink absorber full «ОК»)
E9 - The connected digital camera / video camera does not support Camera Direct Printing
E14 - The Ink cartridges whose destination are wrong
E15 - Ink cartridge is not installed
E16 - Ink remaining is unknown
E19 - Failed to scan head alignment sheet
E22 - Carriage error
E23 - Paper feed error
E24 - Purge unit error
E25 - ASF(cam) sensor error
E26 - Internal temperature rise error
E27 - Waste ink absorber full or platen waste ink absorber full
E28 - Ink cartridge temperature rise error -
E29 - EEPROM error
E33 - Paper feed position error
E35 - USB Host VBUD over current error - USB
E37 - Abnormal motor driver error
E40 - Other hardware error
E42 - Scanner error


You can gave it a good clean out try.
Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 13, 2010 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

ERROR E 2 comes up on the little lcd screen when i try to print now.


www.fixyourownprinter.com

ERROR CODE CANNON MP150/MP160

E2 - No paper (ASF)
E3 - Paper jam
E4 - No ink
E5 - The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly
E8 - Waste ink absorber full, or platen waste ink absorber full «ОК»)
E9 - The connected digital camera / video camera does not support Camera Direct Printing
E14 - The Ink cartridges whose destination are wrong
E15 - Ink cartridge is not installed
E16 - Ink remaining is unknown
E19 - Failed to scan head alignment sheet
E22 - Carriage error
E23 - Paper feed error
E24 - Purge unit error
E25 - ASF(cam) sensor error
E26 - Internal temperature rise error
E27 - Waste ink absorber full or platen waste ink absorber full
E28 - Ink cartridge temperature rise error -
E29 - EEPROM error
E33 - Paper feed position error
E35 - USB Host VBUD over current error - USB
E37 - Abnormal motor driver error
E40 - Other hardware error
E42 - Scanner error

Oct 26, 2009 | Canon PIXMA MP160 All-In-One Printer

1 Answer

My hpdeskjet 940c wont accept a 4X6 photo paper It tries but the paper doesn't slide through


Print a test page only in black. If little to no black shows, you need a black. If your color cartridge seems full, only get a new HP black ink cartridge.

Oct 03, 2009 | HP DeskJet 940c InkJet Printer

2 Answers

When i turn my printer on the light flashes green once and then orange 5 times. cannot get past this stage - any ideas?


Here are all the flashing explanations:

Two flashes: Out of paper or paper feed error

Reload the paper correctly and press the RESUME/CANCEL button.

Three flashes: Paper jam

If paper has jammed in the printer, clear the jam, reload the paper in the printer correctly and press the RESUME/CANCEL button.

See Paper Jams

Four flashes: Empty ink tank

If you press the RESUME/CANCEL button, it will continue printing with an empty ink tank. After printing is finished, replace the ink tank immediately. If you continue printing with an empty ink tank, it may cause damage to your printer.

Refer to your Quick Start Guide for instructions on how to replace an ink tank.

Five flashes: No print head installed/Defective print head

Install the print head. Also, ensure that the protective tape has been removed.

If reinstalling the print head does not solve the problem, replace it with a new one. Contact the Customer Care Center.

Eight flashes: Waste ink tank almost full

The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL button to cancel the error so you can continue printing. Before the waste ink tank becomes completely full, contact the Customer Care Center.

Mar 08, 2009 | Canon BubbleJet i560 InkJet Printer

3 Answers

Canon S 520 doesn`t print


Two flashes: Out of paper, paper jam or paper feed error
Replace the paper correctly and press the RESUME/CANCEL button.
If paper has jammed in the printer, clear the jam and press the RESUME/CANCEL
button.

Three flashes: Paper jam
If paper has jammed in the printer, clear the jam, replace the paper in the printer
correctly and press the RESUME/CANCEL button.

Four flashes: Empty ink tank
One of the ink tanks is empty. Replace it.

Six flashes: No print head installed
Install a print head.

Seven flashes: Defective print head
Remove and reinstall the print head.
Also, ensure that the protective tape has been removed. If reinstalling the print head
does not resolve the problem, replace it with a new one.

Eight flashes: Waste ink tank almost full
The printer has a built-in waste ink tank for the ink used during print head cleaning. Eight
flashes indicates that the waste ink tank is nearly full. Press the RESUME/CANCEL
button to cancel the error so you can continue printing. Before the waste ink tank
becomes completely full, contact a Canon service representative to have the waste ink
tank replaced. Canon recommends to call for service as soon as this error occurs. Once
the waste ink tank becomes completely full, printing will be no longer
possible.

Oct 19, 2007 | Canon S520 InkJet Photo Printer

3 Answers

Cannon smartbase MP360 inkjet printer


Looks like you are either using non genuine inks or have worn out the print head. Just replace the print head and use genuine ink, your print head will last longer and your colors truer. Non genuine ink is cheaper but the profit on it is huge, thats why lots of people sell it. Remember you get what you pay for.

May 20, 2007 | Canon SmartBase MP360 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus CX6400 All-In-One InkJet Printer Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2679 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Ekse

Level 3 Expert

13434 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...