Question about Select Jazzy Used Electric Wheelchair
Consult your owners manual for the flash code guide. I believe that you probably have a PG Drives Joysitck/Controller, in which case a 9 code would indicate problem with the brake system. Check the free-wheel levers by placing them in the neutral position, and then firmly placing them back in drive. Try to restart. If still flashing, you need to remove the seat and the shroud and examine the connections inside the base of the chair. The brakes are at the end of the motor, and there are thin wires coming from them back to the controller box. Inspect these wires for any damage, and follow them back to make sure any connections on the way are tight, and that the connections for all clip connections are tight.
The brake is electrically operated by a solenoid. If the solenoid has gone bad, then this will also cause a fault code. Contact your dealer for servicing this part. Good Luck.
Posted on Jul 09, 2009
Tips for a great answer:
Aug 06, 2018 | Select Health & Beauty
Aug 02, 2018 | Elite Health & Beauty
Jun 04, 2018 | Select Health & Beauty
Nov 24, 2016 | Pride Health & Beauty
Nov 15, 2016 | Health & Beauty
Dec 28, 2015 | Pride Jazzy Select 6 Indoor Power...
May 17, 2015 | Pride Jazzy 1103 Ultra Standard Power...
Nov 05, 2014 | Pride Mobility Jazzy Select Elite
Jul 08, 2014 | Select Jazzy Used Electric Wheelchair
Dec 02, 2013 | Pride Mobility Products Jazzy Select
5,952 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: