Question about Jet 3 Ultra Power Chair

Open Question

How do I change batteries in Jet 3 powerchair?

Posted by Anonymous on


1 Related Answer


Scooter Doctor

  • 401 Answers

SOURCE: why wont my jet 1 powerchair move with fully charged batterys

If the charger is unplugged and the freewheel levers are in drive position. The joystick should not have any flash lights on it, this indicates a flash code that needs to be addressed. If the lights are rippling up and down it could be locked out. some joysticks can be reset by pushing the horn button twice after turning it on within 10 sec.some are reset by pushing joystick forward until it beeps then back til it beeps this done right after startup also. otherwise there maybe something more serious going on with the chair. Strege Mobility

I’m happy to assist further over the phone at

Posted on Oct 10, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jet 3 Ultra powerchair. Why does it turn in circle only, if and when it wants to at least do that?

the freewheel lever is not in the drive position on both sides

I’m happy to assist further over the phone at

Feb 12, 2016 | Jet Health & Beauty


Powerchair flash codes (Applies to most powerchairs)

The listed Flash codes are pretty standard and are applicable to powerchairs only not scooters:

1 flash User Fault (do not touch joystick) and turn back on

2 flashes Battery Fault Recharge batteries or replace

3 Left motor fault check connections or replace

4 Right motor fault check connections or replace

5 Left park brake fault check freewheel lever or brake connections

6 Right park brake fault check freewheel lever or brake connections

7 Remote fault check connections and wiring replace remote

8 Controller fault Check connections and wiring replace controller

9 Communication fault check cable replace

10 and 11 are unusual and will not be seen if at all

on Mar 06, 2011 | Health & Beauty

1 Answer

Powerchair motor wiring for jet 3

hi John, it;s rather straightforward , two wires for the motor two for the brake..

Motor wires are coloured black and red ...


Feb 05, 2016 | Pride Mobility JET ULTRA 3 BLUE POWERCHAIR

2 Answers

New batteries new battery harness still 3 red bars and two yellow bars flashing what else could it be

[PDF]Pride Jet 2 Hd Owner's Manual - Scootaround
The symbols below are used throughout this owner's manual and on the power chair to identify ... Jet 2 HD 3. TABLE OF CONTENTS.

Sep 28, 2015 | Jet 2 HD for 350 lbs, Power Chair,...

1 Answer

I want to donate a jazzy jet powerchair. its in good worling condition, just need new batteries.

The batteries range from 160- 500 bucks, look in paperwork for correct size and call around for best prices

I’m happy to assist further over the phone at

Aug 14, 2015 | Jet 3 Ultra Power Chair

1 Answer

New batteries installed, and flashing red lights, continuous, will not move

hi , how many flashing red lights are all of them flashing ?


Jul 22, 2015 | Pride Mobility JET ULTRA 3 BLUE POWERCHAIR

1 Answer

My Jet 3 powerchair stops and will then start again.

sounds like you have a loose connection somewhere. it takes experience and patience to find it call 1-800-800-8586 to seek a qualified tech in your area

Nov 11, 2012 | Jet 3 Ultra Power Chair

1 Answer

I cant get my power chair jet 3 to charge batteries are good

Hi valentin 201
I have owned my own business for 3 years and have been working on scooters and powerchairs for 15 years. . In the future give as much info about the scooter as possible.

1. load test the batteries even if you think they are good, check anyway. Sometimes even new batteries won't hold a charge.

2. Your charger on the powerchair must have enough volts to open the charger inhibitor. That is, the charger won't even start up if your batteries are low. Both batteries need to have at least 20-22 vdc.

3. Some chargers have a 3amp fuse check that and repace if needed.

4. With a multi meter set on dc200 check your batteries. Red on one battery and black on the other. Check to see what you get for voltage. If no voltage reverse the lead wire to the other posts. Once you get a reading of 20+ volts watch the meter and plug in the charger, it should increase the volts on the meter. if not the charger is bad, replace. Charger should be 24-31 volts to be a good charger.)

One of these sugestions will fix the problem

Good Luck

May 03, 2011 | Jet 3 Ultra Power Chair

1 Answer


You cannot make a powerchair operate while it is charging. For safety purposes the power cuts out when charging batts. The only power is going to the batteries.

Feb 26, 2009 | Jet 3 Ultra Power Chair

Not finding what you are looking for?
Jet 3 Ultra Power Chair Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jet Health & Beauty Experts


Level 3 Expert

85239 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

ray gallant

Level 3 Expert

67926 Answers

Are you a Jet Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides