Question about JVC AV-27230 27" TV

Open Question

How do you change imputs on the TV?

The TV is AV-27230 or a 27f475 that I do not have the remote for and the imputs need to be change so that I can get programs on the TV.

Posted by Anonymous on

Ad

1 Related Answer

gopakumarg43

The Knight

  • 76432 Answers

SOURCE: I have a jvc tv model number AV-27530 and a tv guide universal remote i need programing instructions

Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Code Search
If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Posted on Jun 23, 2012

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What's the imput button or code on remote for ten year old TV. Model #14MS2331/17


According to the manual for the Magnavox 14MS2331/17B, you switch to the A/V input by pressing Ch+ or Ch- on either the TV or the remote until you see AV as the current option. (Thus you have to scroll down from Channel 2 or up from Channel 69 for an OTA signal. For cable TV, the AV will be reached by Ch - from channel 1 or Ch + from channel 125.) See page 3 (7 of the PDF) here: http://download.m4c.magnavox.com/files/1/14ms2331_17b/14ms2331_17b_dfu_aen.pdf .

Since it is possible to skip channels by editing the channel list, you may need to check if the AV option has been skipped. To do this, press Menu. Use the up/down buttons to navigate to Install and press the right button to enter this menu. Highlight the Channel Edit line and press the right button to check this. Once in this sub-menu, use the left/right buttons to scroll through the Channel number options (or use Ch+/Ch- to see the stored list). You can also type in a channel number on the remote. Press the down arrow to change to the line that reads Skipped. Use the left/right arrows to change between Yes or No. (No indicates you can reach the channel with the Ch+/Ch- buttons.) Use the Up arrow to return to the channel number line to scroll to other channels. Press Status/Exit to leave the menu system. See page 10 (14 of the PDF) for details.

I hope this helps.

Cindy Wells

Aug 28, 2017 | Televison & Video

1 Answer

I don't know how to change the tv onto the wii. Help


grab your remote there should be an imput button on it if not try the menu u need to select the right input could be aux could be tv 2 tv3 ect.on my tv it says AV i select that and my wii come on there hope i helped!

Dec 14, 2012 | Computers & Internet

1 Answer

My child incerted a pendrive in the service usb terminal and tv doesent work no more what could be the problem


When a drive is inserted into the USB port, many tv will change to that input. You most likely just need to select the imput button on your remote and change back to the correct imput for what you are looking at.

Mar 02, 2012 | Televison & Video

1 Answer

My tv is stuck on the video imput for my Wii and none of the front panel buttons work


Try to see if any of these four methods will work.
Sanyo TVs
1. Press VIDEO MODE or TV/VIDEO button in front panel or on remote
2. Press MENU , choose FEATURE SETUP, then choose either VIDEO MODE or TV/AV, select VIDEO or AV
3. Press TV/AV or INPUT SELECT on remote
4. Press SETUP, choose TV/AV, switch to AV

Sep 25, 2011 | Panasonic TH-42PX60U Television

1 Answer

How to change samsung tv imput without remote or button on front


You need to get the remote to work to switch on the AV circuit or ther other option is to CROSS/SHORT the processor output to switch on the AV- not recomended.
so get hold of a universal remote and the TV will respond.
check this link:

http://www.espares.co.uk/search/remote-controls/p/1090

Sep 23, 2011 | Samsung Televison & Video

1 Answer

My imput button on my tv remote for my Disney princess tv doesn't work. How do I switch the imput to watch Dvds if the imput button doesn't work?


Hello,
If the input button on your remote is malfunctioning you can still change the input from the TV. There is a white panel on the bottom front of the TV with 4 buttons. The button on the far left side of that white panel is the input button. Press that to toggle to your inputs.
Regards, Tony

Apr 17, 2011 | Disney Princess 13'' TV Recorder

1 Answer

Changing imput without remote


Hi
There should be some buttos on the side or under the screen,there will be an input button there

Aug 17, 2009 | Sylvania 202SL8 TV

1 Answer

Will my TV work with Easy Cap


I don't think so. Iv you have the AV inputs, (yellow, white red) on both the consoles and TV, that is sufficent.

Feb 14, 2009 | Ulead Videostudio 8 for PC

1 Answer

Remote doesn't go to who imput


I'm afraid, if there's no such a button on satellite remote control, the only way is to replace your spoiled remote control with a new one on the electronic part's shop.

Oct 07, 2008 | GE 32GT740 32" TV

2 Answers

Sanyo TV is stuck on Video screen


Universal Remote should do it.

Sep 08, 2007 | Sanyo DS24205 24" TV

Not finding what you are looking for?
JVC AV-27230 27" TV Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76432 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...