Give me link of vista supported driver.......

Hi
Try calibrating the printer.Click on the link below for a video tutorial on the same.

www.racoindustries.com/zebra-105sl-printer-calibration-video.htm

Hope it helps.

Try adjusting the darkness. It may be too dark.

I have seen the darkness level setting on the printer cause the barcodes to blend together

Install? Well that could mean a lot of different things. Just plug it up and run the ribbon and labels through their correct paths. I don't know anything about your network. (If you even need to set it up that way.) You can just connect it to the back of your PC. Follow this link. This will tell you all about the specifications of the 105SL. Not really your connections though....... http://www.intermeccorp.com/pdf/105SLusersguide.pdf

Hi,

You can find the information about installation of rewinder in the printer manual. You can download that manual by clicking this link which I uploaded for you.

Hope this helps.

Here's a link to the drivers for this printer; they include both Windows XP and Vista drivers. Install the Vista drivers
http://www.zebra.com/id/zebra/na/en/index/forms/en/download_file_pages/license_only.html?siteid=100&redirectURL=https://www.zebra.com/id/products/global/en/drivers/barcode/zd_driver_1_4_52.DriverFile.File.tmp/ZD1510Certified.exe&passfile=/id/products/global/en/drivers/barcode/zd_driver_1_4_52.DriverFile.File.tmp/ZD1510Certified.exe&regURL=https://www.zebra.com/id/zebra/na/en/index/forms/en/download_file_pages/download_file.html&dvar1=Drivers&dvar2=Zebra%20Designer%20Driver%20(32%20bit/64%20bit,%20Windows%20Certified)%20&dvar3=58

http://www.zebra.com/id/zebra/na/en/index/drivers_downloads/drivers/results.html?productType=7

Click on the link abpve to download the latest drivers for vista.

How many labels has the printer printed? Because it sounds to me like you just need to replace the print head.

They are around $400 from whomever your supplier is, and very easy to replace.

new or old ribbon?