I was pressing options on my bose "settings" now i cant use the settings oand system buttons ov the TV

What I did to connect to BOSE wireless speaker to my MacBook air was go in advance settings and uncheck all three options there and then press the wireless button until it beeped--> then I was able to pair it to my laptop. Success!

Try resetting the entire video/audio settings to default. The blur on the picture may indicate that your motherboard is going bad. Recently there was a customer who had the same problem. It was his board. When we tried the AV cables, the blur went away. We tried different HDMI cables and the blur was still there when using HDMI output. It wasn't the TV, and it wasn't the HDMI cables. It was the board going bad.

Try accessing the recovery menu 'safe mode'.

Press and hold the power button until the systems shuts off. (wait 2 seconds)

Press and hold the power button again until you here 3 beeps. Let go.

It should ask you to connect your controller via usb and press the PS button in

the middle of your controller. There will be a menu with 6 options. Try 2-5.

hi,
do the following do not watch for ay video.

1 Press and hold the Enter button on the media center.

2. While holding the Enter button down, press the Store button.

3. Use the Volume up and down buttons to scroll through the Video options.

4 .With the proper selection made, press Store to confirm the selection and leave the Video
options

ok

Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 guide) 1. Hold down the aux button until all lights flash. 2. Press 2 to ensure Aux is set to audio. 3.Enter code 761 and press the pound (#) button. Now to have the satellite remote default volume to Bose Solo do the following. 1.Press and hold AUX 2.press # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo. (see page 22 of Bell 9242 guide)

When i play the radio on my bose lifestyle , my radio sounds good. but when i send music with from my apple computer to . airport, and then to my bose lifestyle, the sound just come out from on 1 speaker. not the toher ones, but when i play radio all 5 works....

anybody got a solution??

Alex, Sthlm

Double check to be sure the TV is on the proper input.

Can you still play a DVD? If DVDs still play, reset the system by unplugging the power cord for a minute. The menus should return.

If DVDs don't play either you may have accidentally changed a video setting. Fortunately you can access the video settings from series II and III systems with the buttons on top of the console. If would be best to call Bose tech support so they can walk you though accessing the video settings. 800-367-4008

I'm having the identical problem.

First, using the remote Turn the unit off.
Then, using the remote Turn the unit on.
Next, Press the [System] button
Next, Press the [Right] Arrow (once)
Next, Press the [Down] Arrow (4 times)
Next, Press the [Right] Arrow (once)
Next, Press the [Up] Arrow (once)
Next, Press [Enter]
Last, Press the [System] button

Done