Question about Nordic Track NordicTrack Treadmill, A2550

Open Question

Treadmill incline not working - Nordic Track NordicTrack Treadmill, A2550

Posted by Seymour Graham on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Incline does not work but incline motor runs for 3 to5 seconds proform415ct


if the motor tries to work but incline does not go up something is jammed on the treadmill or the incline motor is bad

Oct 17, 2014 | Proform 415 CT - Treadmills

1 Answer

I have an Epic t60. The incline stopped working. I was in the midst of going from flat incline to full and then back down again when it stopped. The incline numbers now register on the display, but it...


Try to recalibrate the incline. Start the machine running, press the incline up button, then pull the safety key off. Release the incline up button and replace the safety key. The treadmill should go to maximum incline then minimum. after calibration is completed, retry the treadmill operation.

Jan 11, 2011 | Epic Overstock T60 Treadmill Treadmills

1 Answer

My treadmill is stuck in the max incline position


If the incline moves but only just a bit, it could be a problem as simple as the gearbox on the motor being jammed. We remove the motor from the treadmill, reconnect the wiring, and then try to run the incline motor outside the treadmill. Many times, this will unjam it if that is the problem and then reinstalling it in the treadmill will get it to work. If you have the same problem or it doesn’t run outside the machine and you can hear it try to work, you need to replace the incline motor.

Jun 11, 2010 | Nordic Track Exercise & Fitness

1 Answer

Lifefitness TR 9000 treadmill - 1997 model


Because you are hearing the lift motor making a noise, it sounds like the gears in the motor are bad. The fix is to replace the lift motor.

Apr 28, 2010 | Life Fitness 9000 Next Generation...

2 Answers

Proform 740CS runs okay but the incline does not


ProForm Treadmills have a reset procedure for the incline function. With the key inserted in the console, activate the incline; while the incline is changing, remove the key. Wait 30 seconds, then replace the key. The incline should to maximum, then to minimum, resetting its limits. It worked for mine just 10 minutes ago; the procedure is in the manual if you have it. Good luck!

Mar 09, 2010 | Proform 7.0 Crosstrainer Treadmill

1 Answer

Treadmill not working properly. Incline keeps slipping.


there is a plastic spacer at the rack area on the incline mtr- this white plastic spacer has broken, only recourse u have is to unplug the white wire on incline mtr, and never have a incline, or replace incline mtr when you find out how much the mtr is you might want to walk with out incline- if you was in my area, I have them cheaper

Jan 07, 2010 | Proform Quick Burn Pro Treadmill with 12...

2 Answers

My nordic track treadmill won't decline


My wife had the same problem with her treadmill. I turned the beast on it's side, and unscrewed the plastic casing that houses the motor, computer, and all the electronics to the treadmill. I unplugged the incline/decline motor. Then on the bottom of the treadmill the long threaded rod that causes the incline needed to be moved. So I unbolted it from the catch, and manually screwed the rod back in with a wrench. Now the treadmill works fantastically, of course the incline/decline mechanism has been disabled, but I would rather have a treadmill with the incline disabled than have one always on 100% incline. Hope you found this helpful :)

Jan 05, 2010 | NordicTrack Exercise & Fitness

1 Answer

Will my ifit treadmill card work in an incline


Technically, the Incline Trainer and the treadmill are two different type of machines. The incline trainer raises much higher so the card that is designed for the treadmill will not work on the incline trainer unfortunately.

Nov 29, 2009 | Proform Quick Burn Pro Treadmill with 12...

1 Answer

My console does not allow me to change the incline, speed, etc. The control panel does not acknowledge the buttons pushed. I've turned it off and on.


my treadmill is doing the same thing. the only buttons that work are the start; incline up. 4 incline; 8 incline; and 11 incline.

Sep 26, 2009 | Reebok 8700 ES Treadmill - Silver Service...

Not finding what you are looking for?
Nordic Track NordicTrack Treadmill, A2550 Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Cindy Wells

Level 3 Expert

6132 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Jesse Garza

Level 2 Expert

80 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...