- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The blade assembly is either jammed or broken. I would remove the assy and test to see if it runs. If I you have isolated it to the blade assembly. (If not its internal and needs factory service).
Heres a link to the manual. The graphical instructions for removing the blades are on page 4.
Please contact the Andis customer service dept at 1-800-558-9441 to have sent or you can visit our website andis.com under the service tab are copies of all manuals.
You can get a copy of the user manual from the Andis website. Click on the service tab, from the drop down choose Use and Care Manuals, type in the model MBG2 and PDF will open.
Stop, Their no manual on how to take your Andis Master apart. The Andis Master has small parts that you can lose. The adjustment on this clipper are not easy to do. I
The blade has not been lined up correctly when it was put back on. For complete instructions on how to replace the blade please visit the Andis website at www.andis.com. Click on the service tab and then use and care. Scroll down to the model you have and click once more. If you need any additional help please call the Andis customer service department at 1-800-558-9441.
Please visit the Andis website at www.andis.com. Click USA, then from the tool bar click service, to find the schematic click parts list and for instructions on how to use the trimmer click on use and care.
If you should have any further questions please call the Andis customer service department at 1-800-558-9441.
For the replacement of blades please visit the Andis website at www.andis.com. Choose USA, then service, then use and care. Once you are at the use and care section find your model and click on it to bring up the instruction manual.
If you are still have problems there are two service stations in Maryland as listed below. If neither of these are close to you you can send the unit into Andis for repair.
Please go to our website at www.andis.com. Click first on USA, then service, then use and care. Once you are at the use and care screen scroll down to GTO and click on the item number. The manual should then come up. If you have any further questions please do not hesitate to contact the Andis customer service department at 1-800-558-9441.
×