Where can i find a cassette adaptor vyms0060 replacement needed

Hopefully you took some pics of taking it apart, doubt you will find info on how it goes back together

Any search engine would answer that question much faster.

"Panasonic PV-P1 VHS-C CASSETTE ADAPTOR"

http://cgi.ebay.com/VHS-C-Cassette-Adapter-Panasonic-PV-P1-TC-30-TC30-/130459514007

You can get a cassette adaptor that will except any VHS-C tapes and play them back on any standard VCR from Maplin www.maplin.co.uk.
They are £14.99 plus post! It's unlikely that you just have to have the Panasonic one!

That may be what you will have to do, in this case, unless you can somehow get that switch to work. I don't understand why the motor continues to run, but it's probably a broken plastic piece or other gear part that's not functioning. When you take the cassette apart, try to look for any broken parts, or loose components that you can reseat. You may have to end up buying another adapter. Wish I knew more to tell you, but that's all I can think of.

Located a cassette adapter for purchase

That's a standard cassette Model but not sure the model off the adaptor here is a place with a lot of those adaptors I belive is this one
http://www.tvps.com/Products/SONY-AC-E30A-ACE30A-Slim-Design-Adapter---New__SO-AC-E30A.aspx

I had a similiar problem, or so I thought, but my son has just found that it needs a battery, which I did not even know, so maybe yours just needs a new battery? the cover is near the tab, hope this helps

This is likely a firmware\software issue

you need to have a specific version of EPROM FLASH ROM programmed files..

Ed

YOu may be confusing HI8 with 8mm. One being analog,the other being digital, and a slight difference in form factor