Hi my Sony Cyber-shot DSC-W55 wont upload anymore to my mac..not sure why. I am doing the same stuff as usual; plugging in the usb and hitting import....
Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.
SOURCE: Sony cyber-shot DSC-N2 how to upload vidoe to pc?
I changed the resolution size under options before filming and uploaded the video onto my provided picture motion program given with purchase of camera. I then switched the file to my videos under my computer so I was able to upload them onto email, and internet.
SOURCE: battery not compatible
it is possible you are using the wrong batteries or instaling them wrong.
theses cameras require better batteries and you may have to pay extra for the ones that will work .
try a different brand.
SOURCE: Uploading Pictures To The Computer.
If you are running Windows XP or Vista in computer, hook USB cable between camera and computer, power up camera, Windows will recognize it and install required drivers automatically, click My Computer, Removable Disk, click folder and copy picture files and paste in some where in computer.
its circuit error need to replace flach unit
SOURCE: SONY CYBER SHOT NOT WORKING
Hello samtx930, "turn off the power and on again" its a very commen problem and occurs when the lens block assembly start malfunctioning. Actually the slide motor not work properly and until the lens not come out completely the camera will not work, that's why the error message appears "Access" and then screen shows "turn off the power and on again". In this situation you have to replace lens block assembly.And the part No. is with description is given below: 1-788-363-11 OPTICS UNIT (ED13A) Thanks for using fixya.
94 views
Usually answered in minutes!
×