Question about Whirlpool LTE6234D Top Load Stacked Washer/Dryer
Belt on the dryer
Posted by Anonymous on
In the back of your thin twin dryer is a small white flat fuse attached with a screw, a clip, and two spade clips and wires. This is a thermal fuse and if tripped will cause your dryer to do nothing. Check with multimeter for continuity and replace if necessary. Also inside machine is a black tubular capacitor that will cause dryer to not run. Again, remove after properly discharging capacitor. Using multimeter check capacitor for continuity and potential. Obviously disconnect all power to machine before even thinking about repair. 240 volts will kill you dead.
Posted on Mar 19, 2008
this unit has no belt,,your motor coupling broke,,i can walk you though,,post question how to change motor coupling,,and its not your motor
Posted on Dec 25, 2008
first access the tech sheet and run any diagnostics it shows for the machine and if this passes,then check/change the fill switch on the control panel along with fill tube from the wash tub base if kinked or plugged
Posted on May 10, 2010
Tips for a great answer:
Jan 01, 2016 | Hotpoint Dryers
Jan 17, 2013 | Hotpoint Belt Drum Drive for VTD00, VTD20,...
Jul 31, 2011 | LG Dryers
May 23, 2011 | Kenmore Dryers
Mar 28, 2011 | Kenmore Dryers
Feb 11, 2011 | Maytag MEDB800VQ Dryer
Jan 03, 2010 | Frigidaire GLER341A Electric Dryer
Oct 23, 2009 | Dryers
Feb 27, 2009 | Kenmore Dryers
Jan 28, 2009 | Maytag PYE2300AY Electric Dryer
Usually answered in minutes!