My Goodmans 5012z camera says calibration needed.how do I do the calibration?

Should be in the menu settings

www.goodmans.co.uk/support

Take the memory card out of the camera and look at it. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

have a read here http://www.fixya.com/support/t179661-drivers
The goodmans suppoort site does niot have any software drivers http://www.goodmans.co.uk/productdetails.aspx?pid=G-SHOT3003CC&language=en-GB
Copied from the link FixYa BY djnick989 Jan 30, 2008 - Goodmans A trading name of Goodmans Industries Limited Goodmans Industries Limited is the operator of this website.
Pre-purchase enquiries: e-mail: [email protected] Address:

• Goodmans Industries Limited
• Bush House, The Waterfront
• Elstree Road,
• Elstree
• Hertfordshire, WD6 3BS.

Many Goodmans products may be purchased direct, please click here to find out more.
Product, order and post sales enquiries: e-mail: [email protected] Telephone: Technical Support Team: 0871 230 1777 Ask our Technical Support team a question.

http://www.mech.gla.ac.uk/~dmckenzi/goodmans/goodmans.html
Go there that link has everything.

most refr's dont so well when the ambiant temps fall below 50 degrees. you should not need to adjust the controls must past the "midpoint" usually 4. but 7 is the coldest setting.
the best thing you can do is check what the actual temps are in your garage and if you can warm it up to above 50, then the unit should run properly again.
if the ambiant temps are too cold, the freezer wont be cold enough and the refr section will freeze things.

hi,

are the photos also blurred when they come out? if adjusting the diopter doesnt fix the issue, you might need to have your camera and lens calibrated. why the lens? its because the issue may be isolated to the lens calibration otherwise the technician will only calibrate the body.

my flash has stop working but everything else works fine on my goodmans g-shot 5032z camera. can you please help

i have a goodmans g-shot2025tft
i am unable to find my installation disc.
its pretty difficult for me to use the digital camera.
pls help
anya esq

If the PC is a ME/2000/XP computer you do not need a disk Windows can get along fine without - try it.