The possible problems could be in no real order>>>
1. your power outlet in your house
2 the power cord to the mixer broken or shorted
3 the speed control plate inside the mixer needs adjusting or replaced
4 the carbon brushes inside the motor head of the mixer need replaced
5 the armature a motor part
6 the stator a motor part
The first four are easy fixes the last two will require a full tear down. but there are lots of things to test first. let us know.

Feb 22, 2013 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

Mixer doesn't move

The engine runs?Swept gear; need to disasemble and inspect.

Jan 01, 2013 | KitchenAid KV25G0X Stand Mixer

1 Answer

Kitchen aid k45ss mixer plug i in and it doesn't do anything ?

check the brushes

Nov 30, 2011 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Power went out then back on and mixer reads err and 12 in the timer turned breaker off then back on still reads err

Leave the breaker off for at least one minute then try it. If that doesn't take care of it then you will need to have Hobart come out and check the frequency inverter (drive).
www.hobartservice.com

May 21, 2011 | Hobart HL600 Legacy Stand Mixer

1 Answer

Only have two phase power power company refuses to install three phase can i run my hobart h600-t mixer serial#31-1068-582 ml# 104385 with just two phase?

first thing, there is no 2 phase pwr. there are only single phase or three phase.you have 2 choices either you can convert mixer from 3phase to 1phase which will be expensive, or you can get a rotophase which will make 1phase pwr to 3phase pwr to run mixer, dont go with static phase inverter, only the rotophase inverter

Jan 19, 2010 | Hobart H600 Stand Mixer

1 Answer

Need to convert 3ph to 1ph older h-600 model

that means changing mtr , contactors,that 1 phase is expensive never mind the kit to c/o keep 3 phase set up install a roto-phase in building, not a static phase inverter . the money you spend on coversion of mixer, i think the roto-phase is the cheaper of the two

Oct 07, 2009 | Food Mixers

1 Answer

This is a 3 phase mixer. Is it possible to connect it to my single phase bakery without buying a 3 phase converter?

no not without changing mtr. contactors,installing a roto-phaseinverter is the way to go dont get static inverter

Aug 27, 2009 | Hobart D340-6007 Mixer

Not finding what you are looking for?

View Most Popular

HL600 Legacy Stand Mixer

Food Mixers

Hi We just bought an Hobart ae200. Our problem is that it is 380 volts. Is it possible to change this to 220-230 volts?

Hobart Food Mixers

Open Questions:

0 Answers

Ask a Question

Usually answered in minutes!

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Hobart HL600 Legacy Stand Mixer? Or just drag it here!

The inverter has been changed but mixer doesn't starts

Add Your Answer

Attachments: Added items

Related Questions:

Hi We just bought an Hobart ae200. Our problem is that it is 380 volts. Is it possible to change this to 220-230 volts?