Question about Jenn-Air 27 in. Electric Single Wall Oven with Multi-Mode Convection
Posted by Anonymous on
SOURCE: jenn air double ovens
First, with the door closed, find the screws at the bottom of the door and remove. With an assistant, open the door and remove any side and inside screws you find. The door will separate into two halves. Be aware that most glass is not clipped in...they can fall and break. Remove the front panel from the door...the door may try to slam shut. To clean the glass, use a blue cleaner and a scrubby or very fine steel wool rubbing gently. Scratches are not allowed! Take pictures of what you're doing so you can replace. Be careful of brittle door insulation.
Posted on Dec 07, 2007
reset your breaker reprogram the clock try again what happend last time it was working self clean broiling etc
Posted on Dec 29, 2007
SOURCE: jenn aire
Oven Fault Codes:
F0 Function key shorted or stuck button Clean and unstick button or replace Touch Pad or Clock
F1 Defective Touch Pad or Membrane Replace Touch Pad or Membrane
F2 Oven over heat defective Relay Board or (if present) or defective Sensor
F3 Oven Sensor Open Replace Sensor
F4 Shorted wire or Sensor locate short and correct it or replace Sensor
F5 Hardware, safety circuits disagree Replace Clock
F6 Missing AC (power) signal Check for proper voltage (plug, breaker, etc.)
F7 Function key shorted or stuck button Clean and unstick button or replace Touch Pad or Clock
F8 A/D Warning Replace Clock
F9 Door Lock Warning Check door lock circuit or Replace Clock
Posted on May 10, 2008
Tips for a great answer:
Nov 19, 2013 | Jenn-Air Ovens
Jan 25, 2011 | Jenn-Air Maytag Appliances 27" Electric...
Nov 01, 2010 | Jenn-Air 27 in. Electric Single Wall Oven...
Apr 10, 2010 | Jenn-Air 30 in. Pro-Style Electric Single...
Jan 31, 2010 | Jenn-Air 27 in. Electric Single Wall Oven...
Nov 11, 2009 | Jenn-Air 27 in. Electric Single Wall Oven...
Dec 30, 2008 | Jenn-Air 27 in. Electric Single Wall Oven...
Oct 08, 2008 | Jenn-Air Ovens
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: