THE LIGHT ON THE INSIDE HAS BURNED OUT - Ecoquest Flair Air Purifier

How long have you owned the machine? If bulb is out, (the one deep inside the machine) it means the RF ionizer or needle point ionizer isn't working. Clean both of them and you should get the bulb to come back on.

If you are sure that the plate is clean, in perfect condition, and inserted correctly, it would appear that the transformer is defective. This means that power is not going through the metal contact fingers into the plates.

The light probably has burned out. It is not essential to the working of the machine, so it isn't anything you need to be concerned about.

Vollara (formerly Alpine/EcoQuest) is no longer producing or servicing the XL-15. However, a newer version, called the Classic, is available. You can call Customer Service 800-989-2299 and they will tell you your options. Use #16618 if you need a referral number.

pull the unit out of the enclouser and check the bottom for a circuit board and on the board their is a glass fuse see if it is blown. Also on that same board their is a small round black fuse that is labled f21 it is a 400ma 250 volt fuse on my unit and is soildered in this fuse is just for the ozone

You probably have a burned out high voltage transformer. That's what produces the ozone. Helpful hint...........the high voltage transformer is also the one used in bug zappers

no but your uv ligth its burn out

When the high voltage transformer is working right, it will make the neon bulb glow.
You probably have a burned out high voltage transformer. That's what produces the ozone. Helpful hint...........the high voltage transformer is also the one used in bug zappers

You probably have a burned out high voltage transformer. That's what produces the ozone. Helpful hint...........the high voltage transformer is also the one used in bug zappers

Broken discharge plates have to be replaced, otherwise the high-voltage shorts-out through the break. The glue being burned is an additional clue.

The fan is a separate circuit/function.

Replace the glass plates (purchase from EcoQuest Intl. or from a EQI dealer near you, expect to pay ~$20-30/plate depending on model and shipping costs. I also sell them as I am an EcoQuest™ dealer, though the shipping charges may make me less economical than someone local to you. If you want my contact info, please respond with a "FixYa" rating - thanks in-advance.

If I can be of further assistance, or if you have questions about any of my response(s), please let me know before rating me.

If this solves the issue, please rate it accordingly. My goal is to earn a "FixYa" rating from everyone I help.

Thanks for using Fixya.com,

Jon

No. This is not repairable. You will need to purchase a new cell from your local hvac contractor.