Icom ic fr5000 clone NG whats is solution for this?

Icom IC-41PRO User Programming Software

Radiotronics Pty Ltd https://www.radiotronics.com.au > ... > Software

Icom CS-41PRO is the genuine and official programming software for the Icom IC-41PRO UHF CB two-way radio. Compatible with Windows 10, 8.1, 7, Vista and XP.
Free · ‎In stock

• 
  

  Protected: Icom IC-41PRO Dealer Programming Software

  https://www.radiotronics.com.au > products > icom-ic-...
  Icom CS-41PRO is the genuine and official Icom IC-41PRO programming software for use by dealers (not customers).

ICOM CS-41PRO v1.02 Dealer Programming/Alignment ...

Radio Cables https://radiocables.com.au > cs41pro-software

ICOM Dealer Programming, (includes Alignment built-in) Software CS-410PRO Revision 1.02 - Instantly available for Download! Locating service & storage fee, ...
A$24.99

Icom CS-41Pro CPS (R1.02) Programming Software

HamFiles https://hamfiles.co.uk > icom-cs41-pro

Jun 25, 2017 - Programming software for: IC-41Pro. Includes: Installation & Connection Instructions. 35rem Notes: TX (Editing is restricted) ...

ICOM CS-41Pro Rev. 1.02 PROGRAMMING &amp

eBay https://www.ebay.com > itm

The CS-41 Pro (Dealer) is designed for clone and programming the ICOM IC-41 Pro. ICOM CS-41Pro (dealer) Rev 1.02. Clone and Programming Software.
US$24.49

Icom Programming Software Guide

Quality Two-Way Radios https://quality2wayradios.com > store > icom-program...
Icom Programming Software Guide. The guide below outlines by Radio M

CS-F3011 Icom Software for IC-F3011 & F4011 - Download

https://quality2wayradios.com > store > icom-cs-f3011-...
Icom Programming Software for IC-F3011 & F4011 ... This item is for download only. We no longer ship CD's. This cloning software is designed to perform data entry ...

IC-F3011/F3013/F4011/F4013 Instruction Manual - Icom ...

https://www.icomamerica.com > downloads > Do...
PDF
manual contains important operating instructions for the IC-F3011/. IC-F3013 vhf transceivers ... ceived, according to the pre-programming. (For IC-F3013/.

No, cloning is not possible between these two brands.

Do you have a USB programming cable for the radio? If not, get a USB to serial adapter and plug between the computer USB and serial programming cable. Adapter driver will help with the interface.

Search from google

Hi,
It would seem your radio is stuck in Tx(transmit) mode, this is what I will suggest you do: join yahoo group SPECIFIC to your radio Make/Model, this is free, the technicians there will go through the procedure with you to resolve the issue.

I hope the is the solution you require.

Best regards,
Peter

See previous post...

Peter

What you have is a programming issue. The radios need to be "cloned" so they will all work together. You can buy the software on line for about $65.00 then you can change frequencies when ever you want.

cqham.ru

My neighbor just had this problem so I delved into it and fixed it.

You will need another working radio and the cloning cable.

DO NOT GO BUY ONE FOR 23 BUCKS PLUS SHIPPING!!!!!!!

This cable is nothing more than the same one you use to pipe your MP3 player into a car's AUX input.
You either have one or know someone who does that you can borrow.
If not go buy one from Sears ,Best Buy or any decent truck stop should have them for about ten bucks.

Turn both radios off.
Now with the 3.5 mm cable plugged in to both radios hold down the up and down arrow buttons and turn them on.
They should say "clone".
Now press the" ENT" on the good radio,
This will send the data over to the "bad" radio.
Now turn them both off, remove the cloning cable and turn them back on.
Both should be working now.
\WARNING if your battery is in bad shape it can cause the problem to come back. Either deep six the battery or hit the battery for a few seconds with your car battery charger to shock the cells.
Some times this can extend the battery's life.

Good luck!!
Rich