Question about Samsung RB2155SH Bottom Freezer Refrigerator
The light inside the frige does not work. I have replaced it with a new bulb and still it does not work what do i need to do. it is a samsung RB155sh botttom freezer refirgerator
Posted by Anonymous on
Is this a 'frost free' model - ice has accumulated near the fan. Defrost completely giving extra time for that ice to melt
Posted on Sep 09, 2009
SOURCE: brand new frige , frige
First I would check the fan in the freezer. Listen to see if it is running
It moves air to the ref from the freezer
Then check to see if freezer control is turned WARMER, which makes the Ref. colder
Also this might be a common Defrost problem, Ice
is not being melted by the defrost system.The fan can't blow through the coils into the fridge.
Take out back panel of freezer to check for ice buildup. The coils should be clean.
There are three components to a defrost system- a heater,heater thermostat, and a timer unless you have a defrost electronic card.
Its best handled by a Technician but you could possibly do it by taking your model number to the nearest appliance parts store and asking for the parts. They are mostly located in freezer ,behind back panel on freezer coils.except the card which is usually located in ref The parts store will have info
Also check fan undernearh Ref in the rear
Clean condenser coils underneath
.I'm including my article on Refrigerator Repair for your help and convenience.;
Please click or copy and paste into browser for Article
Thanks for using fixya
Please VOTE FOR ME IF THIS WAS HELPFUL
Posted on Jul 28, 2011
Tips for a great answer:
Jan 07, 2017 | Cars & Trucks
Sep 14, 2007 | Hotpoint FFA60 Bottom Freezer Refrigerator
Dec 25, 2014 | Refrigerators
Jul 04, 2017 | Refrigerators
Aug 15, 2013 | Electrolux Refrigerators
Dec 18, 2009 | Whirlpool Gold White-on-White 21.9 cu. ft....
Aug 10, 2009 | LG LFX25960ST Stainless Steel French Door...
May 28, 2008 | Refrigerators
Mar 12, 2008 | Refrigerators
44 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: