Question about Sony Ericsson W600i Cellular Phone

1 Answer

(sony ericsson w600i model) no programs

Good day to all experts..hope you can help me with my phone cannot open the programs..i mean when i turn on my phone no programsappear..only vibrate and have a dotted color appeared on the screen....and was not able to turn off unless doing the long press...please help me with my problem..thanks and God bless...


Posted by roxette on

  • roxette Nov 04, 2007

    hw cn i reprogram my phone model sony ericsson w600i?

  • Szacoma Nov 06, 2007

    I had dropped my phone on my kitchen floor, couldnt have been more than a 2 foot drop, and it said "inactive sim" and shut itself down. Now this is the same thing I go through everytime it is dropped. This time however, once i put everything back together, instead of working fine all it would show is numbers. Specifically 4:2649. My phone is pretty much frozen and all it shows is those numbers. It doesnt seem broken, so there has to be a way to fix it. Please help, I love this phone and i dont like having to use my older phone.



1 Answer

Zaid Anarwala

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 457 Answers

Roxxete u have to flash a new software on ur fon and szacoma u have to change the display of ur fon

Posted on Nov 28, 2007


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

I change the batterie on my iphone 5s and still disharge quikly

turn off your iphone then charge your phone completely without any interruption then use the battery to consume full level till the phone went to off automatically do this minimally 2 time,
After this you will see good result.

Regards : Ahsan

Mar 29, 2015 | Apple iPhone 5S

1 Answer

New intermatic timer installed. I can turn on manually and it will turn off at designated time but will not prgress to turn on automatically.

If display shows, and timer turns lights on-off with manual override, then timer is wired correctly, and battery is good.
If timer will not turn ON at scheduled time, but turns OFF correctly, then best suspect is the programming.
Open following link for ST01C programming steps.

Program1 is ON
Program2 is OFF
Program3 is ON
Program4 is OFF, etc

Review your schedule: Press Mode button until PGM starts flashing, and then press ON-OFF button until 01 starts flashing.
If Program1 cannot be set for some reason, then set your ON schedule on Program3 and ignore Program1. The timer does not mind if you have OFF set on Program2 and ON set on Program3 or Program5 or Program7 etc.

If you have multiple programs, for example different ON-OFF times for each day, then check for scheduling conflicts that will cause timer not to function as expected.

If timer is defective, contact seller about 1-year warranty.

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

May 31, 2011 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

I already paid for the software through credit card....but when i open the program it says its locked and need to close then theirs an option whether to send a report or not....please help me

Hello there Sir/Madam! My name is Alex and I work under expert team surveillance.

Your account is most probably hacked, this shouldn't be happening to you. Contact them and search for money back if this not works after some time, after their support. Good luck! Contact me if need more information.

Hope this helped and/or advised you on your next move.Please rate my solution, thanks in advance. Wish you good day

Adzic A.

May 09, 2011 | Idoru International Volleyball 2009

1 Answer

What is the purpose of the countdown timer? Can you program for just 1 program setting for the full week? When setting program time is the manual on/off switch in the on or off position?

You posted under UPM programmable timers
Open following link to identify product and download manual

Q1) Some UPM timers, and other brands, offer countdown feature in addition to regular programming.
So you choose between regular programming and countdown.
Countdown is for a bathroom fan for example.
Push the button and fan turns on for set amount of time.
After countdown is over, fan turns off automatically.

Q2) Yes all days of the week can be selected.
Set event 1 ON for all days.
Set event 1 OFF for all days.
Do not set more events unless you want more on-off events.

Q3) Switch position depends on model number.
Add a comment with model number to identify product and I will look at manual alongside you.
Or try the switch in different positions.

Add a comment for more free help.
Also take advantage of fixya expert assistance live.
For a price, expert works with you via e-mail or phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Feb 23, 2011 | UPM Programmable Wall Switch Timer

1 Answer

I am trying to get my GE Digital Light Timer to work, but I have all of the setting set but it never turned on.

I test timers. Some are defective on arrival.
GE makes a good timer, and defective timer can be exchanged at Home Depot.

Open following link to identify timer and download online manual for product:

You posted under 15079, 15270, 15089, 15042 timer.
Manuals for these timers are too long to copy than space allowed for free answer.
When I have a problem with programming, I write out the programming steps.
Sometimes the current time is not set.
Most of the time, problems are because of overlapping or conflicting programs.
Sometimes the ON and OFF times are not set for same days.
Also check that timer is set for correct mode, for example 'automatic' so that timer programs will operate.
Carefully re-read steps, and then add a comment about specific part of manual that is confusing.

Also, the lamp has to be turned ON, and bulb must be good.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Feb 09, 2011 | Jasco Ge 7 Day Digital Timer 1 Outlet...

1 Answer

I can not get the timer to automatically turn off and on UTILITECH 7-DAY DIGITAL IN WALL TIMER

Utilitec sells two different 7-day timers.
Open following two links to identify timer, see manual, and read wiring instructions:

From description of problem, it sounds that timer programming is not correct.
Each event needs ON time and OFF time.
If ON time is set.but OFF time is not set, then timer will turn ON and never turn OFF.
ON and OFF times must match days with each other.
Also if programs overlap or conflict, timer will not operate as expected.

I think instructions for both timers say that programs can be reviewed by pressing PROG button.
Re-read manual carefully.
Write out parts of manual that are confusing.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Dec 09, 2010 | Intermatic Inc. ST01C Digital In-Wall...

1 Answer

Why do i have to pay to talk to expert


When you have any problem regarding any device like phone, camera etc. and you use Fixya the Experts will help you to get your problem solved.
If you are satisfied with the assistance then the Expert will get the money paid by you and if not then you will get a refund of the money.

This is why you are charged to talk to Experts as Fixya is not a free website.
Hope this helps.
Thanks for using Fixya.
Good luck and have a nice day.

Aug 03, 2010 | Canon Cameras

1 Answer

How to!!!!!

WAY: 1

* Open the 'Start' menu
* Select 'Expert'
* Select 'Clear Storage'
* You will now be prompted with a warning about the consequences of a hard reset.
WAY: 2

If you cannot run program to hard reset form "Expert" folder. Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.

Feb 05, 2009 | HTC S710 Smartphone

3 Answers

I want earn money but i dont know theways

You have to post 30 free solutions in last thirty days. Then you'll be notified automatically .

Nov 26, 2008 | Computers & Internet

2 Answers

Winfax Pro outbox


do you mean that inbox working good , what is your Operting System ? to run winfax in pefect performance you must have windows 2000 .

-- is this problem appear when you install winfax directly ? or after days that work good and after that problem start ?

Jan 17, 2008 | Symantec WinFax Pro for PC

Not finding what you are looking for?
Sony Ericsson W600i Cellular Phone Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Cell Phones Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers


Level 3 Expert

13434 Answers

Zaid Anarwala
Zaid Anarwala

Level 3 Expert

457 Answers

Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides