Canon vc c4 driver

The scanner driver is missing.

https://www.google.com/search?q=Code+15%2C230%2C0+for+a+macbook+pro

..

you need to get the mac driver installed correctly in the macbook to use the printer

1st You download Webcam Driver.

Canon VC-C4 Network Camera Driver

After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

You can download everything that you need for this camera from this link, just click HERE.

Yes you can but you'll need to install the Mac OsX driver to make it run through your Macbook Pro. You can download the Mac OSX driver from HERE,(open the link and select O.S i.e. Mac OSX and Language and click "submit", the download links will be displayed) it should also be included in the CD that came with the printer.

Let me know if you need further help.

Good Luck.

Thanks for using FixYa.

Hello, please download the driver for Macbook Pro ver 10.5 from below mention canon website:

http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=330&modelid=6609

cheers!!

I don't think there are any drivers for this printer to work on a Mac, sorry.

The VC-C4 uses a Canon WL-V5 remote control, available at B&H Photo here. They also have a power supply for the VC-C50 here. The VC-C50 is almost identical in specification to the VC-C4, it's just a newer model. The electrical power requirements are the same.

You will find the drivers here

http://canon.driversdown.com/Canon-driver-list/s_538_1.shtml

DO you realize that this camera cost around 900 US$? - Might be a little overkill for VOIP.
Apart form that it is an excellent camera. Have look at the manual here.
The camera connects via RS232 (9DSub) or 8pin DSub and you can/have to download the software form Canon's web page.