Canon PIXMA iP3600 Photo Printer
SOURCE: IP1880 Canon PIXMA showing Ink absorber full
Pixma ip 1880 is full(solution)
1. first unplug power cable and usb cable
2. hold power for 1-2 minutes
3. turn on power
4. your printer should back to normal printing
SOURCE: Waste ink near full
Here is a link that provides info about this problem. hope this helps.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=2610&modelid=10443#SupportDetailAct
SOURCE: Canon Pixma ip3600 message saying printer is not online
This could be a problem with the port. If you have the printer attached to a USB hub, directly connect to the computer. Try connecting to a different USB port and test the current port with a known working device. Consider trying a new USB cable (minor damage could be a factor in signal loss).
I hope this helps.
Cindy Wells
Testimonial: "Thank you,I did replace the USB cable and all is well."
SOURCE: my canon printer IP 4840
1:hold the resume botton
2:while pressing resume botton press start botton
3:while holding power botton press resume botton 6 time after that leave start botton your ip4840 is on service mode.
4:please remember one thing there is no service tool yet on internet for ip4840.so please dont waste your time just throw the printer or send it back if warentee still valid if not them buy an other one.
105 views
Usually answered in minutes!
×