- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You may be able to find a replacement harness for the Boss BV9967B at an electronics store or online retailer. Some options for purchasing a replacement harness include checking with the manufacturer, contacting a Boss dealer or distributor, or searching online marketplaces such as Amazon or eBay.
You may also be able to find a universal wiring harness that can be used with the Boss BV9967B. These types of harnesses are designed to be compatible with a variety of head units and can often be used as a replacement for a specific manufacturer's harness.
It is important to make sure that you purchase a wiring harness that is compatible with the Boss BV9967B and the specific vehicle in which it will be installed. Make sure to check the fitment information and any applicable compatibility notes before making a purchase.
if you are sure the speakers are good and the wiring to the speaker is correct then you need to look at the Boss.. a volt meter on the output either at the speakers or the harness should tell you, as it fluctuates with the volume of the unit, hopefully you do have power to the Boss...
did the same thing no harness but went to boss webpage got the number and called said it cost 25.00 with shipping by the way on there support page is a download for there parts form order you'll need it hope this helps
I'm
going through here just to share the circuit diagram (schematic) for
Boss PSA adapter because I know that many people need to repair their
damaged fonts but can not get the original wiring diagram.
The Boss614ca uses a 20-pin audio/power wiring harness. It is available directly from www.bossaudio.com/support for a cost of $25.00.
It's possible that there is an aftermarket harness that would also fit, but I was not able to locate one. Directly from Boss is probably your best bet.
×