Picture problem on 52 inch rca rear projection tv

hows the picture? is it 3d looking? do you have the convergence option in the setup menu

Check video in cables or set top box.

The picture on my 52 inch RCA Projection television has green, red and blue squiggly lines around the objects on the screen and the picture looks 3-D.

I've had this problem with my projection TV recently. I would say your lens/lamp is to blame. It might be time to change it, depends on the last time it was changed, most of the time, the TV will tell you that it needs to be changed, but not always. I think your best bet is the TV lamp.

Go to menu then setup look for convergence if you Do NOt see convergence then you have a open fuse FL231 Located on right side of FBT there is 3 in a roll small brown rectrangle looking caps but they are Fuses it will be in the one in the middle.

If you have the remote, go to the setup screen and move the picture. Converge has nothing to do with where the picture sits but, where the red, blue & green dots land. All you should see are pure white dots. There should be absolutely NO color ghost anywhere on the screen. If so, you need a bar / dot generator to set the convergence to center the dots.

Sounds like someone has put a magnet near it or picture projection from rear may have moved is the picture fine other than tinting?

tv worked great, turned it off one day and back on the next and the on light would not come on nor would the tv work, rear projection 52 inch rca

CP150 is a capacitor in the power supply circuit....feel top to
see if flat....change if "pooched" or swollen..................T.

http://www.partstore.com/ModelDetai...close=1&exact=1

What do you think "CRT ASSY, Projection: Blue" might be?

CRT ASSY, PROJECTION: BLUE
RCA Part Number: 258486
RCA Model: D52W20
52" CRT BLUE P16LTG00BMB, DELTA 250

They want $183,