My dryer started to make a funny noise this week and now it is beeping and showing E60 in the display, what does this mean?
The last alarm code memorized can be displayed even if the appliance is in normal operating mode (e.g. while the drying programme is being performed):
- Press (start/pause) and first option button simultaneously for at least 5 seconds: the display shows the last alarm.The alarm sequence continues to flash as long as the two buttons are held down.
The appliance continues the cycle while the alarm codes are being displayed. If the appliance is in programme selection mode, the options previously selected are stored in memory.
E60 is family fault code but after reading last alarm you will see exactly fault code (E61; E62; E63)
E61 - Insufficient heating (maximum time exceeded)
E62 - Power reley to heater unit faulty
E63 - Intervention of auto-reset thermostat on the heater unit
Dado
SOURCE: Dryer stops and Beeps with
At MaybeNow online guides are always there to provide technical support to troubleshoot Maytag Neptune MDE6700A Electric Dryer Problems which is free of cost. You can also get Maytag Neptune MDE6700A Electric Dryer, Dryers Help from archived solutions related to repair, maintenance
Hello friend, thank you for your post!
I see that your Frigidaire dryer is displaying an "E60" error code. I am showing that an "E60" error code is not a valid code. I would recommend performing a reset on your dryer and you can do that by flipping the household circuit breaker off for roughly ten minutes. If that does not help could you please reply to advise what code your dryer is displaying or that "E60" is still being displayed. I look forward to assisting you further. -Matt
2,205 views
Usually answered in minutes!
×