Question about Toshiba 42H81 42" Rear Projection Television

1 Answer

Help power light flashes no picture

Posted by mikelynn on

  • 2 more comments 
  • negrito Nov 09, 2007

    Power light when pressed comes on (red) for about seconds, then flashes repeatedly, no pic or sound...

  • NeedToshHelp Nov 19, 2007

    I just ran into this same issue last night. TV is perfect all day long (and for 6 years prior) and last night we turn the TV on and the power LED is just flashing. Need to physically unplug the TV to get the power to shut off.

  • dc4nomore Nov 28, 2007

    Where are the fuses?

  • Anonymous Dec 08, 2007

    came home from work today and my tv would not turn on, however, the red power light continues to flash but i do not have a picture!! any solutions thanks so much!!

×

Ad

1 Answer

Vista Electronics

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

One or more micro fuses blown = check all = if F850 851 bad =
Replace convergence IC's + solder any / all bad connects, esp.
jumper wires 008,010,017,048,600. Replace blown fuse(s)......T.

Posted on Nov 23, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My camera won't take pictures with the flash on and when i try the red light just blinks. only takes pictures with no flash.


When your flash light (I mean the part that gives the flash) or the capacitor that stores the power for the flash are defect. you won't see a flash. When a red light comes on, when actually the flash should fire, the most likely the capacitor is defect. The electronics sensed it could not reach the voltage needed to fire the flash.
It also could mean your battery can't deliver enough to charge the capacitor, but is that was the case the battery indicator should tell you.

Jan 20, 2014 | Nikon COOLPIX S230 Digital Camera

1 Answer

Sony kds-60a2000 power light flashes 5 times, no picture


5 flashes - Lamp Driver - (lamp driver faulty)

This is the error code that usually means the ballast (it is the power supply for the lamp) is bad.

SD TECH

Apr 20, 2012 | Sony KDS-60A2000 60" HDTV

1 Answer

Red power light flashing..no picture


Count the blinks of the led. The number of blinks gives an idea of which board has failed let me know

May 01, 2010 | Panasonic Viera TH-50PX80U Plasma TV

2 Answers

No picture no sound opc light and power light


This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one or twice,sometime tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced.

Dec 28, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

4 Answers

Tv tunrns on then goes to stand by flashes 4 times & repeats


turn tv on picture comes up 2to3 seconds later tv blacks out then stand by red light flashes 4 times in a row repeatedly..can not turn on or off when stand by light starts flashing but before tv blacks out you can turn tv on and off repeatedly and picture and sound work.You have to unplug power cord for 30 seconds after stand by light comes on to get tv to turn on.

Mar 13, 2009 | Sony BRAVIA KDL-32S2000 32 in. LCD HDTV

1 Answer

65 hd projection tv -no picture-red power light is flashing-help


There are many circuit failures that can cause the TV to do this. By far the most common issue is a failure of the convergence output ICs. Expect to spend $350-450 to fix this.

michtech

Feb 18, 2009 | Toshiba 65HDX82 65" Rear Projection...

2 Answers

ACER AL1715 PowerLed blinking only,no picture,flash about .5secs


This sounds as if you are using the hibernate feature in windows reboot it and reset the power options to hibernate never check the vid connection as well

Dec 19, 2008 | Acer AL1715 17" LCD Monitor

1 Answer

Television power light flashes on panasonic television


3 flashes is the error code for convergence failure. You will need to change both of your convergence ICs they are STK392-110 you can get replacement ICs at the following link with free instalation instructions with pictures so you can do the repair your self. Heres the link.
http://servicemanuals.vstore.ca/

Jun 22, 2008 | Panasonic PT-47WX49 47" Rear Projection...

1 Answer

Power light flashing/ no picture


I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.

Jul 11, 2007 | Toshiba 56H80 56" Rear Projection...

Not finding what you are looking for?
Toshiba 42H81 42" Rear Projection Television Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76390 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...