Is it possible to connect my panasonic sg-hm22 to my Denon Reciev

1. Open internal fuse
2. Power supply failure

Your denon amp amp does not match and work well
in some players for instance "Samsung" no pictures
and sound via HDMI input. Only replacing players
to another brand such as LG can fix the problem.

I don't have the specs available however, many turntables utilize the actual wall outlet voltage to operate the turn table itself. if you have one in front of you, you can measure the voltage directly. It should be AC as the frequency of the input voltage is what sets the base rate of the motor that operates the turn table and is then typically altered by the transmission.

there should be a small switch on the inside of the turn table that allows you to switch from 45 (what i think your listening to) to the normal speed which i think is 33

It's a simple matter to Google it and find them on auction sites, then watch what people will actually pay for them.

for example...

http://cgi.ebay.co.uk/PANASONIC-SG-J600L-GHETTOBLASTER-BOOMBOX-RECORD-PLAYER_W0QQitemZ380333454874QQihZ025QQcategoryZ109018QQcmdZViewItem

You can't put a price to something you have no idea what is all about. Know the condition of the unit, if it does work, it's a steal for used one.

http://www.turntableneedles.com/Needle-711-D7-BEVEL_p_1324.html

hi, i'm not sure where you're from but i just bought the battery at sim lim square in singapore for the model SV-MP730V (Penasonic). they have a website to it, you may want to look it up to see if there is any near your place
website: http://www.battery.com.sg
email: [email protected]

You may want to take receiver into a repair shop. I had the same problem, not useing a wireless transmitter. My denon has been in the shop since Jan 9th. There is a problem with zone 2.

some models have a hole(s) in the turntable under the mat. You can put your fingers through the holes in the turntable to fix the belt into position. Good Luck.