Question about Singer 1725
Posted by Anonymous on
SOURCE: Singer 1725
The hook drive gear is seized and requires lubricant ,this is the gear right behind your bobbin case I believe you can access it from the rear ,I hope this helps
Posted on Jan 10, 2009
With your slide plate open, you will see 2 screws on the bobbin case. You need to adjust the one on the inside (not the one that sits at the edge of the metal strip). Do so very slightly. If you can't seem to get it adjusted, take a look and make sure there isn't any thread or lint in between the two pieces of metal that the thread feeds through. This can cause a loose tension.
Posted on Mar 01, 2009
Take the thread completly off the machine and rethread it making sure it goes thru the tension wheel properly.
FYI Loops on the bottom-- Problem is in the threadding.. Loops on the top, problem is with the bobbin.
Posted on Apr 19, 2009
Tips for a great answer:
Feb 19, 2017 | Singer Sewing Machines
Nov 23, 2010 | Singer 1725
Aug 02, 2010 | Singer Featherweight 132Q Mechanical...
May 31, 2010 | Singer 3116 Simple
Nov 19, 2009 | Singer 1725
Mar 26, 2009 | Singer 1725
Dec 08, 2008 | Singer 7422
134 people viewed this question
Usually answered in minutes!