- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Presumably you want to make transparencies. There are Transparencies available specifically for Laser printers and Copiers. Do not use anything else or they will melt around the fuser and wreck your machine. Fixable but expensive.
Nothing wrong with your printer! Most printers detect paper presence with a LED. Problem is acetate being clear the printer thinks the source tray is empty. :)
* Go down to an office supply store and buy acetate that has a 1/4" strip of opaque material on the short edge. * DIY. Take some permanent marker and with a ruler put a black stripe on the short edge. Let it dry. That should let the printer sense that acetate is there.
Some printers use a light sensor to tell if paper is loaded or not. If printing on clear acetate, try loading a regular sheet of paper under it. It should pull the acetate sheet through and leave the regular paper in tray. Since the Epson sx200 is an inkjet printer be careful not to smudge. I would allow a good 5 to 10 minutes to dry. Good luck!
This product does not support acetate or OHP printing due to the relative inexpensive cost associated with the device epson marketed this for Photo printing and general B-W colour prints only. it is not recommended to print on acetate or OHP film.
If this answered your question please rate the resolution accordingly
1 of 2 things: First, check yuor Cyan cartridge and make sure that it is not leaking. It may have a bad seal. If you replace it with a known good toner, the imaging unit (the black acetate thing) will need to be replaced. This is also a consumable unit.
i had the same problem i solved this by sticking plain whitecopier paper to the direction strip with double sided sticky tape printed asultra gloss photopaper
The document feeder is used for copying and scanning ,it is a unit in a copier where you can placed your documents or originals for copying and scanning. The bypass tray is used for copying and printing, the bypass tray is used for types of paper like plain paper, acetates etc and customized papers. If you want to used the bypass tray for printing you should go to printer properties or configuration and select the tray you want to used like bypass tray .
×