Stanby in camcorder - Handycam Sony Video Cameras

Stanby is the off position

stanby light does not come on my LG 42 PX3RV-ZA

I know on many cameras, you can leave the tape door open and they will not go into standby. Is there a way you can try that on yours?

CCD Imager IC is bad and will be replaced.
A7013219A is part number of required IC and it is available in Part Store.

Sounds like the lamp needs to be replaced.
Re your Sharp XR 30S We are able to supply replacement lamp delivered (excluding local your local taxes) for $US270 as we ship internationally and also the same with our revolutionary ICE Digital Daytime projection screens.
http://www.youtube.com/watch?v=HvZ2DlVJ790 http://www.youtube.com/watch?v=qL_44xfK9y8 Regards Kevin Andreassend ICE AV Technology Ltd http://www.digitaldaytime.com [email protected] +64-9-414 2348

I would assume the power board has a problem. A tech could possibly repair it without replacing the whole board.

i have the same problem. if you could send driver for panasonic nv ds 65, i would be very grateful !

This unit shouldb e flashing a repeated count on the standby light. That count will indicate the circuit in which a problem was detected causig the shutdown. Please post that count and we should be able to provide details on the repair.

Thanks,
Dan

Hey Uttado,
Check to see if the stanby lever that surrounds the record switch on the back of the camera has inadvertently been put on standby. If this has happened, the VCR will work but not the camera. Move it off of lock to standby and it should crank right up.

My tv does not turnon and the only thing on is the stanby light