How do i get the sound back on my t.v.? picture is fine. just the sound suddenly went out.

Unplug the set for a while, also a cable or sat box or home receiver and power back each to allow them to try to reboot.

irupich61,

Bad convergence circuit. I have a tip at http://www.fixya.com/support/r4220499-change_projection_tv_convergence_ics which explains the problem, how to repair it and where to get the parts at the best price.

Thanks for using FixYa and for the great rating. Please consider a testimonial. Thank you.

hardrocko

The sound amplifier IC has went bad and needs replaced. Call a good TV Tech.
Check with the BBB 1st before you decide on one.

common problem with the flat panels. There are lights inside the case that needs to be replaced. you'll need a repairman for this.

should replace capacitor ( c 1010 marked on board if it is a M134C chasie also (c 1013) both capastors are 10 mfd at 16 volts. Also check (Q603) rca part number 266897 could be bad.

Sounds like a failed vertical amplifier circuit. This is normally primarily contained in an integrated circuit mounted on a heatsink.
There are other possibilities along the line but the one above is the most likely.
Now all you need is a TV repair shop that is still in buisness.

hey we can't see or hear

bulb burned out

my volume went out all of a sudden will it ever come back on or how can i get it back on

May need a horizontal driver transformer. Rca can not provide a part number. In the future don't buy this junk from China.