I.beat run it will not turn on

Under warranty , return it!

I don't know if your talking about subwoofer or speakers but if they stop while a big loud beat comes in its to much for your amps if you have them to handle and the amps turn of and by turning of your head unit and on again it resets them and works again try turning your gain down on the amps

Omg im experiencing the same problem!

Hi ,this is shenzhenelectronic.

Our website is http:// www.shenzhenwholesale.com

we have some electronics ,for example Microsoft Xbox360 Live card 10000 US Points，Moster beats by Dr.Dre solo hd，Moster beats Dr.Dre pro and so on.

Welcome to visit our website

Moster beats by Dr.Dre solo hd

http://www.shenzhenelectronic.com/monster-beats-by-dr-dre-solo-hd-headphones-black-red-white-hot-sell_p53915.html
Moster beats Dr.Dre pro

http://www.shenzhenelectronic.com/brand-new-monster-beats-by-dre-pro-headphones-in-white-black-5pcslot-hot-selling_p53932.html

Hi ,this is shenzhenelectronic.

Our website is http:// www.shenzhenwholesale.com

we have some electronics ,for example Microsoft Xbox360 Live card 10000 US Points，Moster beats by Dr.Dre solo hd，Moster beats Dr.Dre pro and so on.

Welcome to visit our website

Moster beats by Dr.Dre solo hd

http://www.shenzhenelectronic.com/monster-beats-by-dr-dre-solo-hd-headphones-black-red-white-hot-sell_p53915.html
Moster beats Dr.Dre pro

http://www.shenzhenelectronic.com/brand-new-monster-beats-by-dre-pro-headphones-in-white-black-5pcslot-hot-selling_p53932.html

Hi
This clock short of needing a full service may simply be out of beat.

Taken from my web page located at:
http://antiqueclock.clockstop.com/CLOCK_BEAT.htm

"HOW TO PUT YOUR CLOCK IN BEAT"
-Included below is a 10-second sound <snip> of a clock both in and out of beat.


IN BEAT ////////\\\\ OUT OF BEAT
· Turn on your sound and click on the clocks above for a sound clip.

-One little known fact is that a clock does not have to be level to be in beat. I had a customer that had a mantel clock in an old farm house, it was brought in for repairs and sent back running great just one problem: I put the clock in beat on a level surface [a small problem] because the mantel it had set on for it's entire life was not level. I had to literally go to the house to put it in beat where it sat.
-I have often found most Grandfather or floor clocks are set up out of level and put in beat where they stand, This is fine.
-As I'm sure we now realize a clock must be in beat but not always level to function properly.

· Above is the verge with a slip clutch.
· Often found on Grandfather clocks and requires only a long swing to get it in beat.

-To get the clock on the right side in beat you would need to push the verge assembly to the left.
-If it must be bent to put it in beat, do it slightly, but don't bend any of the suspension parts.

R/ David

format i.beat motion on ur pc.....if don't work take it to a shop or something

The video may be glitched or the memory is full. Try unlocking the unit by pressing the reset button with a paperclip. It's located just below the on/off switch on the right side.

The only thing that I can think of is that you are using a dryer intended for Europe in the US. While they both run on 220V, the timer motor will be specific for the frequency of the country. The US uses 60 Hz. Europe uses 50 Hz.

To keep the explanation simplistic, your timer motor expect 50 electric (frequency) "beats" per second but instead is getting 60 beats per second. Your clock is turning an extra 12 seconds every minute.

its not disply coming only sound coming and its not connected in pc