Blackspur key lock reset

RUSH BACK TO THE STORE WHERE YOU BOUGHT IT. The only one who can give you safe code is the one who sold it to you.
As if it has a default code? Electronic cosdes might be reset but of sourse, you should know the original.

https://www.youtube.com/watch?v=_tqTp57YfCw

http://www.safeoptions.co.uk/blog/how-to-change-number-on-keysafe-lock/


In any case, if someone with experience with a safe similar to yours might be interested to share his experience, you should provide make and model of you unspecified safe.

I've been lookin for safe mnauls on internet and got this one:

http://www.sargentandgreenleaf.com/pdf/630-302_6120_op.pdf

and also this one:

http://hilkab2b.co.uk/manuals/s-25ea%28ii%29.pdf


How To Change Number On Keysafe Lock Safe Options


Guses might find some better information should you provide make and model of your safe.

Oxy-acetylene.

You're going to have to cut your way into it, I'm afraid.

If you leave it for a week or so, the batteries MAY just have enough charge to open the safe once more.

Setting the Combination
1. Remove the key holder from the KeySafe by pressing the RESET button, followed by the OPEN button. Pull down on the key holder from the bottom of the KeySafe
2. Remove the bracket. Press the Release tab on the bracket and slide the KeySafe upward until it is free of the bracket.
3. Remove the plastic card attached to the bracket. You will see ten numbered buttons with arrows. These numbers correspond to the numbered buttons on the front of the KeySafe. An up arrow indicates that the button is not selected, a down arrow indicates that the button
is selected as part of the combination.
4. Using the screwdriver tip on the plastic card, apply light pressure
to rotate the arrows on the buttons you've selected for your combination a half-turn to the downward position until it snaps into place. Caution: The arrows must either point up or down, with downward arrows representing the numbers in your combination. If any arrow is pointing left, right, or is not fully seated when turned downward, the combination will not work. Improperly setting the combination is not covered under the warranty.
5. Return the plastic card to the bracket for future use

Well, you MIGHT be stuck and out of luck, however there are some tricks you can try. Check out the blog on http://suprakey.org/ - they have several solutions for those that need to reset the combination of a Supra Key lockbox!

Good Luck!

Blackspur BB-ES100 How to reset the code. Have the key

Check batteries and replace, also make sure contacts for batteries in the safe are clean and not correded with rust, if so rub with sandpaper and clean up.

try to remove the battries for about 3 min. then put new ones and try it may work...let me know
Please do not forget to rate my service for the site to continue helping everyone and improve on it.

On the keyboard, you should have a num lock key; it will be on a regular key but it will say it in a different color, usually blue. Press the Fn key and that key and that will solve your problem.