camera is working . when capture image than it can't save image.only camera set for focusing. how can i solve this problemcamera is working . when capture image than it can't save image.only camera set for focusing. how can i solve this problem
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.picsolve.com/cadburyworld Key in 12 digit alpha-numeric number from receipt. You are asked for your email and to make up a password to register. Prompts for downloading and saving appear after you have identified the picture. Repeat process for other pictures.
3. sometimes work and sometimes not work this problem come from this defect (A) flex or socket system keypad any line is bad soldering or do lose contact. check them and re-soldering or keep there line join with extra ware. (B) for cpu bad soldering or cpu pin is broken. so re-hot or re-ball cpu.
In today's cameras on off button only give a pulse to processor to switch on.actually camera is on all time technically.only screen is off.Your problem may be flex connection to main board has failed. The group connector for on off, click, Tele, wide, all together forms one connector. Whole part to be replaced by camera technician to save your camera.
Prakticam, unhelpfully don't have anything for their cameras more than a couple of years old and don't seem to care if you mislay the disc you paid for.So be warned, don't buy Praktica. I have the 5200, you have firstly to put your usb in computer, switch on camera, switch camera to view pictures taken mode, and because it auto switches to take picture mode you then carefully attach camera end into camera whilst camera is still switched on! Then go to my computer and click on F: the pictures download. Then to save them click on first pic, hold shift key down and then click on last pic they should all highlight, right click and then hover 'send to' and send by left clicking to my documents. I remember that it took me 4 hours to work it out. Found this looking for manual to download, cannot change date now......
The problem is inthe two sections.
1) Bad CCD . replacement will solv the problem.
2) Thin film ribbion cable carrying signal to the shutter / apparture control gets damaged in regular use. replacement of the same will solve the problem. Have to take the help of a repairer.
I also had the same problem - Finally solved it by reformatting the Memory Card on my Home Computer.
Note - It was not solved by using the delete pictures function on the V1253 Camera.
The problem only occured after I had used a friends Computer to delete pictures only from the Memory card.
Hope this helps!
the flex wire of the lcd monitor is already cut...go the sony service for the replacing flex wire...or to the other service center for fixing the flex wire....
one of the possible cause of the said problem can be a defective or broken flex ribbion cable carrying signal to the focus motor. the replacement of the flex will solve the problem.
othe may be friction in the focus assembly. cleaning of the same will do the job.
but in both the cases you will need the help of repair shop.
camera is working . when capture image than it can't save image.only camera set for focusing. how can i solve this problem
×