Hi i have a convergence problem with my samsung sp42w5hfx, i have renewed both ic's and 1 of the pico fuses was blow so changed that aswell, in service menu i can get the green to move but not the red and blue! please can anyone advice on what i can do
If u can get the red and blue to line up u need to use the remote to change movements from red to blue to green, i cant recall of hand now how i did it and i dont have the service manual at hand ,u need to download the service manual that will give u how to get it to the service mode viya the remote etc, hope this helps u
Hi i tryed this to but still have the same problem and now my auto focas says no sensor
so can you please give any mote things i should try many thanks dave
Compare IC connections with meter = check solder joints to
see if some are touching one another. Tell me exactly what
brand & part number was installed...........T.
PS. The red,green,blue plugs may be mixed up because the green should stay and red & blue move !
235 views
Usually answered in minutes!
×