Question about Pride Jazzy 1103 Ultra Standard Power Chair

1 Answer

Red light flasheswhen on. 4times turn off - Pride Jazzy 1103 Ultra Standard Power Chair

Posted by joe tessier on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 175 Answers

This flash code is indicating that the right motor has a bad connection. It rarely is the case that the cable leading from the motor to the controller comes usually is the case that the motor has overheated and burned out a winding that makes it....toast, unfortunately. This can occur from getting stuck in the mud, sand or getting the chair trapped in a doorway, for instance, and trying to drive it against strong resistance. Also, I should add, that sometimes the controller "lies", and it might be the left motor. Swap the cable from left to right and right to left and turn on the chair and see how many flashes. If is shows three, then the right motor is probably shot. Also, and it happens a lot, if the controller(the box that the cables run into)has been damaged somehow, it may be giving you a false fault code. You have to have a known good motor to plug into the right motor connection, fire up the chair and see if that clears the fault. Either way, it is not a cheap, easy fix. Sorry for your problems.

Posted on May 08, 2014


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Panasonic tv model txp42s20b red light flashing 4times over & over

Hi Muhammad
4 blinks Power SOS P-Board
BOARDS DESCRIPTION: P MAIN Board = Power Supply (VT30 Models) - Non-serviceable. Must be replaced for service.
P SUB Board = Power Supply (VT30 Models) - Non-serviceable. Must be replaced for service.
P Board = Power Supply (All Other Models) P2 Board = Power Supply (All Other Models)

Hope this helps

Mar 12, 2014 | Televison & Video

1 Answer

Flashing light code 4times over & over

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
Blinking codes details to many popular brand TVs are given.

Feb 22, 2014 | Panasonic Televison & Video

1 Answer

Repairs for a sony kv-27s42tv

Over-voltage protection circuit energises. Check the output voltage tht comes out of its SMPS section to main board. If this voltage is more than/less than normal, this kind of fault can occur. If you wish to get some details, check the site linked here. Pull up older posts.

Dec 29, 2013 | Sony FD Trinitron WEGA KV-29LS35 29" TV

1 Answer


Four blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal line then the video signal muted. Check IC1509, Q1505. Check the vertical output IC, especially to the solder terminals for any loose soldering points. Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there.

Nov 30, 2012 | Televison & Video

1 Answer


Hi, My guess is that you don't have adequate power for your flat panel. By all means do not use long extension cords. Try a different wall plug. You must have 120V ac to work. Read your manual that came with it. Good luck

Jun 08, 2011 | Televison & Video

1 Answer

Pictures not appear

this could be a leaky picture tube. will require a crt rejuvination machine to clean the tube elements

Dec 28, 2009 | Sony FD Trinitron WEGA KV-29LS35 29" TV

2 Answers

Doesn't power up. Red standby light flashes.

How many times does it flash?

Odds are the A board components. Let me know how many times the stand-by light flashes, and I'll tell you want the fault might be.

Oct 25, 2009 | Sony KV-27S40 27" TV

Not finding what you are looking for?
Pride Jazzy 1103 Ultra Standard Power Chair  Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides