The printing is blurred, how can I correct? - HP CP3525N Color LaserJet Printer

Blurred print may be caused by a dirty print-head - remove and wash with clean warm water. Dry with paper towel and retry.

Blurred print may also be caused by a print-head alignment fault. First check that there are no paper fragments at either end of the print path inside the machine. Then go to the maintenance section either on the printer or in the computer printers folder and perform a nozzle check, print head clean and print alignment. in that order

Jan 08, 2015 • Canon PIXMA Office Equipment & Supplies

0helpful

1answer

Blurred print of incoming and outgoing report

There are usually two things that can cause blurred printing.
1 The toner/drum needs changing.
2 The fuser assy is worn and not fusing the toner onto the paper correctly. This is easy to check. Does the print rub off the paper with your finger? If so then a new fuser is required. Also its possible a tooth on the gear that drives the fuser is broken. The fuser gear may have also worn down and its jumping on the gear that drives it.

Dec 20, 2013 • Canon LaserClass LC 8500 Plain Paper Fax

0helpful

1answer

Lexmark C752 printer The printed image is blurred, looks like out of focus and the colors do not seem strong enough? any ideas ?

first check the toner level ? is it correct?
the blur can be caused by a dirty LASER UNIT remove all the cartridge clean properly the two laser unit.
if need another help i'm here and tell me me if your problem was resolved or not.

Oct 28, 2010 • Lexmark C752 Printer

0helpful

1answer

Not printing clearly some lines are blurred

You should run a nozzle check to verify if the heads are printing all the inks correctly. If the pattern is incomplete you need to run head cleanings.

Apr 29, 2010 • Epson CX3810 Stylus Color All-In-One...

1helpful

1answer

Incoming fax blurred and incomplete. Can the

The bar can be replaced but usually the blue lever on the right and left of the bar break and don't hold the bar correctly. UF6085001, and
UF6087001 are their part numbers, easily changed by removing one cover with phillips screwdriver.

Aug 13, 2009 • Brother MFC 1850MC Thermal Printer

0helpful

1answer

My print jobs keep coming out with smears in certain spots and now the entire print job is blurred. I've cleaned it several times. How do I correct that myself?

If the entire page is blurred, it is probably a dying wave amp board. Time to start shopping because the repair bill is more than a new 8560.

Jul 08, 2009 • Xerox Phaser 8400 Laser Printer

3helpful

2answers

Brother MFC-210c prints some lines blurred, letters stacked - alignment ok.

i have the same problem. repeated cleanings seem to help, when i print large fonts they come out pretty clear, but the smaller the font, the worse the blurring. 600 DPI prints mismatching patterns, but 1200 DPI prints perfectly fine. so i have found that printing on "fine" quality instead of "fast" or "normal" quality improves print quality ALOT. it uses more ink, but i am in business and need to be able to read very fine print!

May 14, 2008 • Brother MFC 210C All-In-One InkJet Printer

Question 2

Vinaya Kumar Kuchipudi

HP Master 1,124 Answers
Posted on May 15, 2014

Vinaya Kumar Kuchipudi

HP Master

Joined: May 05, 2011

Answers

1124

Questions

1

Helped

451109

Points

2591

# Do the color calibration..chk
# Take diagnoses page printout(menu print out).. ckh 'L' shaped corner images (as shown in fig), if they are not properly aligned, could be ITB faulty..Replace ITB..
For tech guys:
This activity requires lot of patience & experience..
* use gloves, don't use sharp tools, don't tough ITB belt, don't expose ITB in daylight longer..
ITB alienation sensor dirty, remove ITB, locate sensor clean clean it gently with swab.. re-fix back, calibrate the unit, chk...

the printing is blurred, how can I correct? - 62591c6d-63f9-4070-9194-2cafa09022d5.gif

Related Topics:

Trustworthy Expert Solutions

The printing is blurred, how can I correct? - HP CP3525N Color LaserJet Printer

1 Answer

Vinaya Kumar Kuchipudi

Add Your Answer

Attachments: Added items

Related Questions:

HP CP1215 Printing is blurred

Why does green or red hand appear on screen after taking picture

How do I correct blurred calculator printing