Question about Philips 42PF7320A 42 in. Plasma HDTV

Open Question

What are philips plasma tv error codes

Blinking 7 times

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 138 Answers

SOURCE: philips 42pf7320a/37 dead

I do agree with the tech but if the green led don't come on and the 7-blink error code is still there. check the connector from the logic board that will be the board under the small signal baord. The small signal board have the AV input on it. Check the connector from the logic board to the power supply there should be one connectore btween those 2 boards. On the power supply side second pin from the left it will say Vs_On if the set has 0 volts the proble is the SSB or the logic board. how to determain that is to Use 2 Jumpers to short J8003 & J8004 on the left edge of the PSU (see figure below).
Use 1 Jumper to short CN2012 on the lower left part of the Logic PCB (this will supply a 100% White signal to the Display).
Plug in the AC to the PSU thru CN8001.
If PDP panel operates with White field screen then problem may be the SSB.

Posted on Aug 20, 2008

Ad
CAYPIANAN

ESTEBAN MERINO

  • 227 Answers

SOURCE: Philips 42PF7320A/37 blinking red light

hello, amigo if the all the caps are godd then you have to replace the power supply board. don't try to fix it this is not an easy task. you are looking at almost $200.00 with tax an shipping. just go to google and type your tv model # and ask for the power supply board or just look for the part# on the board itself. good luck

Posted on Jul 29, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: I have a Philips 50 inch plasma tv. The light is

I have Philips 50 inch plasma TV purchased almost exactly 3 years ago. Completely out of warranty. Paid 1999 bucks for it new. Now Plasma TVs similar to this are 800 bucks. I figured the cost of a repair tech coming to the house would be around 500 bucks.. so I decided I could "do no harm" and look at the power supply. Sure enough, two 3300 uF caps were swollen.. I am far from a true electrical repair person, and if it were not for the caps being swollen, would have no idea that they were bad. I am however a little bit skilled in soldering. So I ordered replacements for about 8 bucks. The caps were actually only 1.50 ea. but the min order fee and shipping brought it to about 8 bucks.. I got them from studiosoundelectronics.com . They came in today and installed them... to my astonishment, my TV works as good as it did when it was new... I must say that I am dissapointed in Philips.. and will never buy another product from them. If it is out of warranty.. they will not even talk to you.. I don't think it is too much to ask when you spend 1999 bucks on a product from them.. I expected my TV to have more than 2.999 years in life in it. Thanks a million to this site for providing soulutions for folks..

Jeff
Florence AL

Posted on Oct 03, 2009

Anonymous

  • 1 Answer

SOURCE: Philips 42" Flat Screen Plasma - blinking red light 7 times - HELP please!

6f4eeb8.jpg
Here is a photo of the board where I have removed the two from my TV. You can see the two open holes.

Posted on Dec 12, 2009

Chi Chu

  • 8457 Answers

SOURCE: my plasma philips tv dosent turn on and red light blinks 6 times

Power supply board have dead capacitors.U know how to solder?Replaced these capacitors that bulge up,puff up or burst open.Should get ur power back.Or replaced a whole power refurbish power supply buy it at Shopjimmy.com,Ebay.com.

Posted on Feb 06, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture. TV blinks 8 times


I have come across 6 blinks; 7 blink and even 10 blinks.
the video below may throw some light. Not sure if the blink codes are universal across models. Panasonic plasma tv 7 red blinks of *****

Apr 02, 2016 | Panasonic Viera TC-P65S1 65 in. HDTV...

1 Answer

I have a Panasonic TC-P65ST50 which recently began shutting down and displaying 7 blinking lights and 8 blinking lights. Most of the time 7 blinking lights are displayed.


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/

Feb 25, 2016 | Panasonic TC P65ST50 - 65" Class 64.7"...

1 Answer

Panasonic TH-P55VT30A POWER BUTTON BLINKS 7 TIMES.HOW DO I FIX IT AND WHAT PART DO I REPLACE


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/

Jan 07, 2015 | Panasonic Televison & Video

1 Answer

Maytag dishwasher MDB8959AWS2 blinks 7 times and will not work, what is the code to reset.


Try the instructions listed at this site. If the problem still occurs after the reset it is usually the heater element that might be faulty.

http://www.appliancerepairlesson.com/dishwasher-2/dishwasher-clean-light-blinking-7-times/

Dec 25, 2014 | Maytag Dishwashers

1 Answer

While viewing my 50 inch Panasonic (2 yrs old), it clicked and turned off. The pilot light blinked 7 times, paused and continued to blink 7 times, pause etc. That's it. It will not turn on. I look...


7 blinks Driver SOS 2 SU / SD / SS Boards. (SC floating voltage area)
This is the fault. 7 blinks of standby light denotes it. If you wish to get more details about the blinking codes to Panasonic TVs, check the site
linked here. It has details and some troubleshooting hints. google.com/+GopakumarGopalan

Nov 25, 2013 | Panasonic Televison & Video

2 Answers

Sony trinitron 36" has 7 red blinks wont turn on


I HAVE A SONY TRINITRON KV-36HS510. IM HAVING A PROBLEM,ITS NOT SHOWING A PIC, AND BLINKING 7 TIMES THEN PAUSE FOR A COUPLE OF SECONDS THEN IT WILL BLINK 7 MORE TIMES,I CAN HEAR AUDIO BUT CANNOT SEE PIC. COULD YOU PLEASE HELP ME OUT ,I'VE TRIED CUTTING THE TV OFF FOR ABOUT 6 HOURS AND CUTTING IT BACK ON,SAME RESULTS, THANKS

Jan 02, 2011 | Sony FD Trinitron WEGA KV-36HS510 36" TV

3 Answers

My panasonic hdtv th-42pz80u has a red power light that blinks on and off and the tv will not turn on. how do i fix this?


How many times is that light blinking? For example a 7 blink error code would blink 7 times pause 7 times etc. What is your's blinking?

Dec 10, 2009 | Panasonic Viera TH-42PZ80U Plasma TV

1 Answer

Sony Trinitron Wega Standby blinks & the TV won't turn on


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://electro-medical.blogspot.com/
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Apr 12, 2017 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Sony projecting tv kp-57wv700


Based on service manual info, it cant blinks 7 times as per symptoms, please count again blinks. It can be 5 times.
If its 7 times blink, Horizontal Deflection stopped in this case. If you want to repair it at your own, please let me know to guide you further but it is necessary you should have knowledge of electronics.

Aug 18, 2008 | Sony KP-57WV600 57" Rear Projection...

Not finding what you are looking for?
Philips 42PF7320A 42 in. Plasma HDTV Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...