CANON SH50SX SETTINGS ON C1 - Canon PowerShot A75 Digital Camera

This is such a huge and complicated business machine, I reckon you will need a service call. I can't find the error codes, or C1 and C2. In all my searches for manuals, I have never seen so many for a machine!!

https://downloads.cpp.canon/ProductDownloads/Index/574

No Service Manual

https://www.google.com/search?q=canon+varioprint+115+service+manual

and the searches

https://www.google.com/search?q=canon+varioprint+115%2C+C1+and+C2

..

when i turn my conon imagepress c1 printer it state and this error code come it e00001 - 001 what the problem and how can i fix it

if it is the 2nd transfer cleaning waste toner, you have to clear copier-counter-misc-2TC-Box

Follow these steps below to perform a factory/hard reset to your Nokia C1-01:Step 1. Select Menu.Step 2. Select Settings.Step 3. Select Rest. factory sett.Step 4. Your Nokia C1-01 will go back to the state when you take it from the store.Important Notes:1. To reset only preference settings, but keep all personal data, such as contacts, messages and media file, select Restore settings only (or Restore sett. only or Settings only).2. To reset all preference settings and delete all personal data, select Restore all (or All).3. Enter the security code before the restore, if you have never changed your security code, then enter the default code 12345.If your Nokia C1-01 still requests a security code or if you forget , please bring it to the nearest Nokia Care point for inspection.

Whether it's helpful to you or not?
Thanks for using FixYa

you will have to check to see if you can get a driver for the canon to run on windows 7 64 bit

http://download.cnet.com/Canon-iR-C3200-C1-PS-Ver1-0/3000-2116_4-129346.html
download here

E747 from what I remember is the connection cable from either the scanner to the print device, or scanner to the copier. Make sure that none are loose and they are in the correct slots.
Mismatching the cables may result in the error.

you need a set of kodak cards to run full colour set up on your fiery print controller then you just follow the intructions

Error :
E732 code

Workaround :
E732 code is a Reader communication error.
If the Reader is disconnected from the Printer a E732 code will result. Once the Reader is disconnected the logic on the MAIN-Controller is changed to a "0". The copier is now set up to be a Printer only, and will not recognize the Reader.
To correct this, you must enter service mode, COPIER>OPTION>BODY>W/SCNR and set that to "1". Then you must turn the copier off, then on.
To enter service mode: press "Additional Functions" then "2" and "8" together, then "Additional Functions".
Which User Guide? Reference, Easy Operation Guide, Printing Guide, Mailbox Guide, Sending Guide etc....

The C1 & C2 settings are for "Custom" settings. You'll most likely want to set your camera either to "P" or "Auto" mode.
To have it delay for 10 seconds and take 3 shots, press the "Menu" button and then scroll down to "Drive Settings". Then, choose the following settings:
Self-Timer: "C" Delay: 10 sec. Shots: 3 shots
Then, press the "Func./Set" key to lock in the change. Next, press the custom timer button on the back of the camera and then choose the "C" timer using the directional keys. Then, press teh "Func.Set" button.
Lastly, set up your camera, press the shutter release, and the timer light should start blinking. 10 seconds later, the camera will take 3 photos in succession.
Hope this helps!