Cables Do I have to connect both the USB and also the Fire wire to my HP with Windows XP?

Download the Windows XP support software from:

http://singledrivers.blogspot.ca/2014/01/motorola-moto-xt316-usb-driver-for.html

and install it. Then, connect the phone to a USB port.

Where can download the USB drivers for my device

If the USB Port is 2.0, it might not work if the printer is 3.0. If the USB Port is 2.0, it might not work so fast if the printer is 3.0. It would work better if the USB Port was 3.0. And don't forget, USB cables are also rated (USB,USB2.0,USB3.0). Can't tell you how many times I've gotten a printer to work just by switching cables. Good luck.

XP is a dead OS.
100% dead. and not supported now. by MS or HP.
but XP needs SP3, or USB will be bad
XP always had bad USB for years until , all patches were done.
The USB on XP are horrible.
you need good USB so all devices are PnP recognized
and negotiated currents (power) is working
and USB2 currents are weaker than USB 3.
and is key to making any motor driven HDD work right.!!

Dead as a door nail and no more security patches ever again.

FIRST UNINSTALL YOUR PRINTER COMPLETELY
REMOVE ALL CABLES OF PRINTER (USB)
REBOOT YOUR SYSTEM
HAVE DRIVER CD
PUT IT IN ROM(CD/DVD)
INSTALL PRINTER SOFTWARE
DONOT PLUG THE USB CABLE UNLESS & UNTILL PROMPTED
PLUG USB WHEN ASKED
FINISH INSTALLING PRINTER
NOW YOU CAN FIND THE SCANNER

Did you install the printer software and drivers before you connected the printer to the computer by a USB cable? Uninstall any drivers that have already been installed then restart. You can get the drivers again from the web site, http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers . Wait until the software asks you to connect to the printer before connecting the USB cable. If you are connecting to a router for an ethernet connection, then that can be cabled together before installing the software.

If the drivers were installed correctly, start diagnosing a problem with the cables. Try new cables, changing ports, and a known working device on the port. When you reinstalled XP, did you include the motherboard drivers specific to your machine (that will have the USB and ethernet drivers)? If you missed those steps, you may need to uninstall the printer before doing that update and then restart.

I hope this helps.

Cindy Wells

is it wireless or usb, if it usb, dont connect the usb cable. on the installation window where it asks for the usb cable, chek mark on the option connect printer later and continue with the installation

light it on fire

Well I'm afraid not the cable don't not come in such of a way either cause they are different type of cable, but what u can do is buy an external fire wire card for yr PC it comes in PCI format for yr desktop PC. because camcorder in these days do not use USB cables due to the cause that fire wire cable is much faster than the USB ones.

You need to install a FIRE Wire card in your computer and use the appropriate cables connect the camera.XP is capable of recognizing the card.
regards
suraweera