No dailing tone - Aastra 6753i IP Phone

Your handset cord may be messed up, or it may not work with that phone. Make sure that the cord is not plugged into the headset port.

On that phone, press PROGRAM the button and dial 01 STORE.

Press program again to exit programming.

It's not likely you'll be needing the Group Log In/Out button.

Carl

IS THE PHONE LINE PLUGGED IN TO THE RIGHJT JACK YOU WILL NEED TO CHECK THIS OUT FIRST GOOD LUCK BROTHER TECH

open the on screen menu of the phone there should be a selection for dialing rules.. the tone dialing rule should be in that selection..

hand set no dail tone cant all out on the hand set due to no dail tone

Check the cor and cos setting of the phone It shold have the permissions to call outside

http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=373

Is the phone line going to the modem live?

There is usually a switch to change it from dial pulse to touch tone.If there is no switch check your user manual to see if there is a screen option.

tk46

some dial connections dont like the filters attached. does the new modem have more then one ethernet connection on it? have u tried it on another connection if u have on in the house? it may just be your settings in the computer. are you using the same computer for both broadband and dial up? if you are then you may need to adjust the settings in your computer, your isp should have done all that for you.