Why does my tv have like a strobe like effect when i turn it on and only a clicking sound?

LCD TV Repair Tutorial - LCD TV Parts Overview, Common ...

? 11:05
https://www.youtube.com/watch?v=tS4sIpdajVw
Aug 23, 2013 - Uploaded by ShopJimmy.com
Repair review of common LCD TV Problems and Repair Solutions ... input the tv is set to it begins making a high pitched whiningsound. .... I have a LG 47LN5750 that powers on, flashes a good picture for about 1/2 second, then goes dark. ... hi my samsung tvis not turning on is black. and I just replace the ...

#Treat At Home high pitched whine from plasma tv Tinnitus ...

www.aspenridgerentals.com/tinnituscure/?...high%20pitched%20whine%...

LG 50PK540 plasma TV Repair power supply EAY60968801 Part 1-2 ... Sanyo DP42849 with high pitched squeal after replacing power supply. ... In my second daily fix video, I solve a mystery that was making me having to turn off my speakers before I went to be ... The flash is accompanied by an high pitched sound.

TV not turning on; making high-pitched sounds - Tom's ...

Hi...

Find someone that does TV or audio repair and have them open it up. A cable assembly may have loosened during the MOVE.

Cheers

Check and replace all the electrolytic capacitors at its main power regulator board and check. If it do not help you, replace the power board as card basis. It is a power regulator board problem.

I've fixed several of these, easy fix, you will need to replace both 470uf 35 volt capacitors on the master and slave inverter boards. So you will have to replace a total of 4 capacitors. The capacitors themselves are about 50 cents a piece. The inverter boards are on the far left and far right of the set. You will have to remove the back cover to see them. If you don't have the ability to replace the capacitors, you can just order new inverter boards for $40-$60.

There is some dry solder/leaky or dry capacitor in the board. I suggest it is better to refer it to a qualified service technician, since the back cover has to be opened for investigation/rectification.

We need to find out the strobe effect is due to the T-CON board is turning on and off or if the backlights is turning on and off. This can also be due to unstable power supply due to bad caps.
You need to look at the back of the screen to see if the light coming through on the back side of the LCD panel is stable when the picture is strobing.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
Please post back what you find.
Please leave rating if it helps.

Any luck? We bought our tv (same one) in March of last year. It is doing the exact same thing. Time Warner has already came out and switched out the cable box and cables. We have a tv tech coming soon (contracted out from Samsung, of course...) Problem persists...

This depends on the mode you have selected on the flash gun. If you have Multi selected you will get the strobe effect. The strobe effect is all so present to help the flash set the correct exposure. It's not a problem with the flash or the camera. Spend some time reading through the flash gun manual. I have to admit it is not always clear. Also try Youtube for a video.

Sounds like you have an LCD tv with backlight problems. Check power board for domed capacitors and replace them. next check connections on the inverter boards. they are on the sides or just one side. Becareful there is high voltage output from these boards. If the cable from inverter board is not good to the screen you can get a strobing. the inverter boards may need replaced. or cales to screen may be bad. The panel also could be bad.

we have no sound